2013年11月28日星期四

Guide de formation plus récente de Cisco 350-021

Pass4Test est un site d'offrir la bonne Q&A Cisco 350-021. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.

Votre vie changera beaucoup après d'obtenir le Certificat de Cisco 350-021. Tout va améliorer, la vie, le boulot, etc. Après tout, Cisco 350-021 est un test très important dans la série de test Certification Cisco. Mais c'est pas facile à réussir le test Cisco 350-021.

Est-ce que vous vous souciez encore pour passer le test Cisco 350-021? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Cisco 350-021, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Cisco 350-021. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Si vous voulez ne se soucier plus à passer le test Cisco 350-021, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Cisco 350-021. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Cisco 350-021 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Cisco 350-021. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Cisco 350-021.

Code d'Examen: 350-021
Nom d'Examen: Cisco (CCIE SP Cable Qualification Exam)
Questions et réponses: 399 Q&As

350-021 Démo gratuit à télécharger: http://www.pass4test.fr/350-021.html

NO.1 There are two different headends with two different frequencies available sharing the same plant.
There is a -10dB cable loss to the second active in the cascade. What is the required pad for balancing
A. A 0 pad
B. A 1 pad
C. A 2 pad
D. A 3 pad
E. A 4 pad
F. A 5 pad
Answer: F

Cisco   certification 350-021   certification 350-021   certification 350-021   350-021 examen

NO.2 Cisco recommends the use of a headend-grade coaxial cable or a quad-shield coaxial cable with a
minimum of 60% + 40% braid and double foil insulation to connect the cable modem cards to the HFC
network. The center conductor must be straight and extend 1/8 inch (3.2 mm) beyond the end of the
connector, and the connector should be securely crimped to the cable. Select three recommended cable
types that can be used to connect the Cisco uBR7200 series universal broadband routers: (multiple
answer)
A. RG 58
B. RG 59
C. RG 59/U
D. RG 6
E. RG 7
Answer: BCD

Cisco examen   350-021 examen   350-021   350-021 examen

NO.3 If there are two different headends with two different frequencies available sharing the same plant, what
frequency will the two groups of cable modems, which are brand new, and have never been on-line, lock
on?
A. They will lock on the frequency configured on the linecard.
B. They will lock on the frequency configured on the upconverter.
C. They will lock on the first frequency they find.
D. They will lock on the lowest frequency.
E. They will lock on the last frequency remembered in ram.
Answer: C

Cisco   350-021   350-021 examen   certification 350-021

NO.4 Upon deleting an IOS image file from flash, an execution of show flash shows the file still in flash, with
a 'D' preceding it (as shown in the exhibit). What step must be taken in order to remove the file
completely?
A. Erase the file from flash
B. Format the flash device
C. Replace the flash card - it is defective
D. Execute a squeeze command on the flash device
Answer: D

Cisco examen   350-021 examen   certification 350-021

NO.5 A router is set to boot from flash, but cannot find boot commands in the configuration. Also, valid files
do not exist in the default flash device. The router will:
A. Boot from ROM, since there are no valid sources
B. Try to boot from the network, using a default filename
C. Terminate the boot process with an error message
D. Try to boot from the network, then boot from ROM as a backup
Answer: D

Cisco examen   certification 350-021   certification 350-021

NO.6 Which are HFC cable television forward path networks aligned to provide? (multiple answer)
A. For asymmetrical gain since the downstream and upstream bandwidths are also asymmetrical
B. For unity gain with a fixed input level and varying output levels adjusted by the selection of a fixed
value attenuator and equalizer at the output stage in each of the forward amplifiers in the network
C. For unity gain with a fixed output level and varying input levels adjusted by the selection of a fixed
value attenuator & equalizer at the input stage of each of the forward amplifiers in the network
D. It is not necessary to align the forward path amplifiers since the CMTS will automatically compensate
for forward path gain discrepancies.
E. For unity gain and are level compensated by automatic gain and slope control systems utilizing RF pilot
reference carriers
Answer: CE

Cisco   certification 350-021   350-021 examen   350-021

NO.7 A network administrator is using debug commands to check the performance of a network. What steps
can the administrator take to ensure that the "debug" will not require too much CPU, or at least that she
will not have to reboot the router to disable debug? (multiple answer)
A. Make the debug command as specific as possible
B. Use the max-time parameter of the debug command
C. In configuration mode, enter scheduler interval 15
D. Configure a loopback to channel debug traffic
Answer: AC

Cisco   certification 350-021   350-021   350-021   350-021

NO.8 A DOCSIS 2-way data system is being designedto limit upstream traffic. Unknown modems should be
kept from using precious Upstream bandwidth. Given these requirements, it should beensured that the
DOCSIS configuration file has what set?
A. Vendor-specific information field
B. Max-cpe should be set to 1
C. CMTS authentication field should be set
D. Network Access should be set to 0
E. Downstream frequency should be set above 450 MHz
Answer: D

Cisco examen   certification 350-021   350-021 examen

NO.9 Every time a typing mistake is made at the exec prompt of a router, the message from the router
indicates a lookup is being performed. Also, there is a waiting period of several seconds before the next
command can be typed. Can this behavior be changed?
A. No, this is a built in feature of Cisco IOS? software.
B. Yes, use the no ip domain-lookup command.
C. Yes, use the no ip helper-address command.
D. Yes, use the no ip multicast helper-map command.
E. Yes, use the no exec lookup command.
Answer: B

Cisco examen   certification 350-021   350-021   350-021 examen   350-021 examen   350-021

NO.10 The name of the DOCSIS config file to download will be offered to the cable modem in what DHCP
field?
A. giaddr
B. config-filename
C. packet-filename
D. siaddr
Answer: C

Cisco examen   350-021   350-021 examen

NO.11 Given a PAL HFC and 8 MHz channel lineup in the downstream, is it possible to utilize 6 MHz DOCSIS
cable modems and signals on the network?
A. No, only 8 MHz channel spacing is available for Downstream data signals
B. Yes, as long as the 6 MHz DOCSIS signal is within a valid 8 MHz channel
C. Yes, as long as the DOCSIS signal is upconverted through a PAL upconverter
D. No, DOCSIS cannot be mixed with EuroDOCSIS in the Donwstream
E. DOCSIS must be used only in an EIA-542 channel plans
Answer: B

Cisco   350-021   350-021

NO.12 Unity gain is being used for alignment. The first amplifier from the node has 25 dB of gain and is 2000
feet away with cable loss of 1 dB per 100 feet. The node has an output of 35 dBmV at 55.25 MHz. What is
the input at the amplifier?
A. 13dBmV
B. 3dBmV
C. 15dBmV
D. 27dBmV
Answer: C

Cisco   350-021   certification 350-021   350-021 examen

NO.13 HFC cable television return path networks are aligned to provide: (multiple answer)
A. Asymmetrical gain since the downstream and upstream bandwidths are also asymmetrical
B. Unity gain with a fixed input level and varying output levels adjusted by the selection of a fixed value
attenuator and equalizer at the output stage in each of the return amplifiers in the network
C. Unity gain with a fixed output level and varying input levels adjusted by the selection of a fixed value
attenuator and equalizer at the input stage of each of the return amplifiers in the network
D. Cable modems the ability to power range comfortably within their output power dynamic range
E. It is not necessary to align the return path amplifiers since the CMTS will automatically adjust the cable
modem transmit power levels.
Answer: BD

certification Cisco   350-021   350-021 examen

NO.14 In a cable HFC plant, which devices are modulators? (multiple answer)
A. CMTS line card
B. Upconverter
C. Diplex filter
D. Set top box
E. Fiber node
Answer: AD

Cisco examen   350-021   350-021   350-021 examen

NO.15 What describes a technique, used to encapsulate voice (NOT data) over ATM?
A. RFC 1483
B. LANE
C. AAL-1
D. RFC 1577
Answer: C

Cisco   350-021   350-021 examen   350-021 examen   350-021

NO.16 What is the purpose of rate decoupling for ATM transmission?
A. It provides transparency between SONET and SDH.
B. It converts higher-speed DS3/E3 to lower-speed optical rates.
C. It processess the packing and unpacking of frames into 53-octet cells.
D. It allows lower-speed traffic on an ATM facility without causing traffic gaps.
Answer: D

Cisco   350-021   350-021   350-021 examen   350-021

NO.17 What effect will this configuration command have?
line vty 0 4
no password vtypassword
A. All telnet connections to the router will be denied.
B. Only one telnet connection at the router will be allowed at a time.
C. Virtual terminal sessions will not be able to enter enable mode.
D. Virtual terminal sessions will not be asked a user-level password.
E. It will have no effect.
Answer: A

Cisco   350-021 examen   350-021   350-021 examen

NO.18 What is NOT an ATM class of service?
A. CBR
B. VBR-t
C. ABR
D. UBR
E. CAR
Answer: E

Cisco examen   350-021 examen   350-021

NO.19 For communications systems what describes the over-all health of the system?
A. Bit-Error-Rate (BER)
B. Synchronous Optical NETwork (SONET)
C. Optical Signal to Noise Ratio (OSNR)
D. None of the above
Answer: A

Cisco examen   350-021   certification 350-021   350-021 examen   350-021 examen

NO.20 For an OC-48 signal (2.5Gb/s), what is the BER (bit error rate) if there is 1 bit error every four days?
A. 10E-12
B. 10E-13
C. 10E-14
D. 10E-15
E. 10E-16
Answer: D

Cisco   350-021   350-021   350-021 examen

Le test Cisco 350-021 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Cisco 350-021 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Cisco 350-021 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Cisco 350-021 avec l'aide de Pass4Test.

没有评论:

发表评论