Avaya 3600 examen pratique questions et réponses

Il y a plusieurs de façons pour réussir le test Avaya 3600, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Pass4Test vous promet de vous aider à passer le test Avaya 3600, vous pouvez télécharger maintenant les Q&As partielles de test Avaya 3600 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Avaya 3600, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Code d'Examen: 3600
Nom d'Examen: Avaya (Avaya Ethernet Routing Switch Implementation and Maintenance Exam)
Questions et réponses: 129 Q&As

Il demande les connaissances professionnelles pour passer le test Avaya 3600. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Avaya 3600, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

3600 Démo gratuit à télécharger: http://www.pass4test.fr/3600.html

NO.1 What is a characteristic of Routed Split Multi-Link Trunking (RSMLT) configuration?
A. RSMLT is only configured on edge SMLT connections.
B. RSMLT uses priority values to distinguish between the primary and backup routers
C. RSMLT routers are implemented with Virtual Routing Forwarding (VRF)-Lite routers
D. RSMLT is always used in conjunction with routing protocols and SMLT connections.
Answer: D

Avaya   3600   3600   certification 3600   3600   3600

NO.2 Which feature can be used on a Split Multi Link Trunking (SMLT) with a Sod Down option?
A. Extended control packet limit (ext-CP)
B. Discard untagged frames
C. Simple Loop Prevention Protocol (SLPP)
D. Virtual Link Aggregation Protocol (VLACP)
Answer: A

Avaya   3600 examen   3600 examen   3600

NO.3 When multiple VLANs are used, Dynamic Host Control protocol (DHCP) relay is required to get the
DHCP information from the end user VLAN to the DHCP server.
Which statement about how to enable DHCP relay for a VLAN is true?
A. The physical VLAN IP address is used as the DHCP relay agent.
B. The IP address of the DHCP relay agent is used.
C. The IP address of the core server VLAN is used
D. The virtual VLAN IP address is used as the DHCP relay agent.
Answer: D

Avaya   3600 examen   3600 examen   3600   3600

NO.4 Traceout allows a route to be traced to a network using an Ethernet Routing Switch (ERS) 8600 CLI
command. In the command output, the possible range of w
values is 1-255.
The w
value represents wait time for what?
A. Start of command execution
B. Time to live
C. Per probe
D. Completion of traceout report
Answer: C

Avaya   certification 3600   3600 examen   3600

NO.5 Fn Ethernet Routing Switch (ERS) 8300 configurations, which service class ensures that protocol
updates such as RIP and OSPF are able to get out of a heavily congested switch?
A. Bronze
B. Standard
C. Network Control
D. Premium Control
Answer: C

Avaya   3600   certification 3600   certification 3600

NO.6 When configuring a new Ethernet Routing Switch (ERS) 8600 using the default interface, the attempt
to load an ACLI configuration fails because the default interface is the CLI.
How is the ACLI interface obtained?
A. Change the interface type in the config.cfg file.
B. Change the ACLI boot flag and save the boot configuration file.
C. Exit the CLI and choose ACLI at the interface manager prompt.
D. Use the abort command and enter 'no' at the default interface prompt.
Answer: C

certification Avaya   3600   3600   certification 3600   3600   3600 examen

NO.7 A technician discovers that an Ethernet Routing Switch (ERS) 8300 cat5e copper link is intermittent.
The link connects a distant workstation to 8348GTX port 6/2. The cable path is undetermined at this point
and it is suspected to traverse many patch panels.
How can the ERS 8300 Time Domain reflectometer tool be of help in this situation?
A. The Virtual Circuit Test command config ethernet 6/2 vct test can detect opens, shorts, bad
terminations.
B. The virtual circuit Repair command config ethernet 6/2 vct repair can detect the bad cable pairs and
repair the cable by moving data to the good cable pairs.
C. The Virtual Circuit Echo command config ethernet 6/2 vct echo can detect the bad cable pairs only
when connected to another ERS 8300.
D. The Virtual Circuit Detect command config ethernet 6/2 vct detect can detect how many patch panels
are used between the device and switch and provide a percentage of dropped packets.
Answer: A

Avaya   certification 3600   3600 examen

NO.8 An Information Technology organization needs to determine whether they should upgrade their
existing Routing Switch (ERS) 8600 switches to release 5.0. Each chassis currently has both 8648GTR
8648TX modules. One of the features that the company requires is the ability to perform port mirroring on
multiple ports per module at a time.
What should be done to meet their port mirroring requirement when upgrading to software release 5.0?
A. Replace the existing modules with 8648GTRS modules,
B. Upgrade to ERS 8600 Release 5.0 without any hardware upgrade.
C. Replace the existing 8648TX modules with ERS 8648TXE for egress mirroring.
D. Recommend other means to capturing traffic.
Answer: A

Avaya examen   3600   certification 3600   3600 examen

NO.9 A technician is adding the Virtual link Aggregation Control Protocol (VLACP) configuration to a
Converged Campus Solution where all Ethernet Routing Switches (ERSs) are directly connected without
intermediary WAN transport devices.
What are two recommended configuration tasks? (Choose two.)
A. Configure all links to use the same timeout value.
B. For the Inter Switch Trunks (1ST) links, configure the long time-out value.
C. For the SMLT links, configure the long timeout value.
D. Configure all links to use a global reserved multicast MAC address for VLACP messages.
Answer: B,D

Avaya examen   certification 3600   certification 3600   certification 3600   certification 3600

NO.10 The Ethernet Routing Switch (ERS) 8600 supports the feature IP VPN-Lite that does not require the use
of an MPLS network.
Which function does the ERS 8600 as a Provider Edge (PE) perform for IP VPN-Lite.?
A. The PE uses the Virtual Routing Forwarding (VRF) instances to provide traffic separation
B. The PE provides route exchange with remote PE devices using OSPF.
C. The PE encapsulates the IP packets into the separate VPN-Lite VLANs for traffic separation
D. The PE incorporates Label Distribution Protocol across the core network to connect remote PE
devices.
Answer: A

Avaya   3600   3600

NO.11 Which VLAN/VLANS should be included on the Inter Switch Trunks (1ST) for a proper functioning split
Multi-Link Trunking (SMLT) configuration?
A. only VLAN 101
B. only VLAN 1 and the 1ST
C. only the VLANs that are also included on the SMLT/SLT uplinks
D. the 1ST VWN and all the vWNs that are included on all SMLT/SLT links
Answer: D

certification Avaya   3600   3600   3600 examen   3600   3600

NO.12 A technician is configuring 802.1Q tagging Virtual Link Aggregation Control Protocol (VLACP) with
timeout and untagged frames to be discarded.
Which part of the network is being configured?
A. 1ST
B. the out-of-band management port
C. the edge access ports
D. the uplinks
Answer: D

Avaya examen   3600   3600

NO.13 Which protocol can be used for end-to-end detection in a network as well as for point-to-point
detection?
A. LACP
B. VLACP
C. RSTP
D. MSTP
Answer: B

Avaya   3600 examen   3600 examen   3600 examen

NO.14 What is Enterprise Policy Manager (EPM) used for in an Enterprise network?
A. to manage traffic prioritization and network access security for business applications
B. as an alternative to EA servers
C. to distribute control of packet classification for resiliency and efficiency
D. to assign user role attributes on the RADIUS server
Answer: A

Avaya   3600   certification 3600   3600   3600 examen   certification 3600

NO.15 When configuring an Ethernet Routing Switch (ERS) 8600 redundant Installation for warm standby,
which protocol is used to give the fastest recalculation of large layer 3 topology by the standby CPU, after
a Master CPU failure?
A. STP
B. Rip
C. OSPF
D. BGP
Answer: C

Avaya examen   3600 examen   certification 3600   certification 3600   3600

NO.16 Which set of procedures will upgrade the boot monitor on an Ethernet Routing Switch (ERS) 8600 with
a single 8692SF module?
A. Copy the new image to flash.
Activate the new image with SF module in service.
B. Copy the new image to flash.
Boot the new image.
C. Modify the boot choice for run-time image.
Boot the new image.
D. Copy the new image to flash.
Modify the boot choice for run-time image.
Boot the new image.
Answer: B

Avaya   3600 examen   3600   3600

NO.17 One of the benefits of the Ethernet Routing switch (ERS) 8300 switch is its ability to provide
power-over-Ethernet (PoE). When implementing PoE on the ERS 8300 there are certain power supply
requirements to consider. The 8301AC produces 1140W and 1770W and the 8302AC produces 850W
and 1400W depending on the input voltage for both cases.
If there are eight 8648TX-PWR modules in a chassis, each needing 200W for Powered Devices (PI))
which power supply configuration is recommended?
A. One 8301AC power supply with 240VAC input voltage
B. Two 8302AC power supplies with 120VAC input voltage
C. Three 83CAC power supplies with 240VAC input voltage
D. Two 8301AC and one 8302Ac for redundancy with 240VAC input voltage
Answer: C

Avaya   3600 examen   3600 examen   3600   certification 3600

NO.18 The trace level 9 3 command accomplish?
A. It captures BGP events at a terse level.
B. It captures packets copied to the CPU at a verbose level.
C. It shows CPU utilization.
D. It captures RCC IP events at verbose level.
Answer: B

Avaya examen   3600   3600 examen   3600

NO.19 To confirm that routed Split Multi-Link Trunking (RSMLT) will work on a set of VLANs, which network
design aspect should be considered?
A. RSMLT is enabled on each SMLT VLAN on which the function is required.
B. RSMLT is enabled on the VLAN group
C. Router 1 always owns the network
D. RSMLT is enabled on all SMLT VLANs
Answer: A

Avaya examen   3600   3600 examen   3600 examen

NO.20 When incorporating Split Multi-Link Trunk (SMLT) on a pair of Ethernet Routing Switch (ERS) 8600
switches traffic from the edge of the network is directed to either ERS 8600. The ping-snoop feature
assists in determining which path the traffic is taking.
How does the ping-snoop operation work?
Determining which path the traffic is taking. How does the ping-snoop operation work?
A. Ping-snoop looks at the IP header and directs traffic to designated link.
B. Ping-snoop looks at the MAC header and directs traffic to the designated link
C. Ping-snoop identifies traffic that matches the IP flow specified in the ping-snoop command.
D. Ping-snoop identifies traffic that matches the MAC header (source and destination) specified in the
ping-snoop command.
Answer: C

Avaya examen   3600 examen   3600   3600   3600

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.