Dernières Oracle 1z0-593 de la pratique de l'examen questions et réponses téléchargement gratuit

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Oracle 1z0-593 à se preuver. Mais le taux du succès et bien bas. Participer le test Oracle 1z0-593 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Le test Oracle 1z0-593 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Oracle 1z0-593 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Oracle 1z0-593.

Pour réussir le test Oracle 1z0-593 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Oracle 1z0-593. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Oracle 1z0-593 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Code d'Examen: 1z0-593
Nom d'Examen: Oracle (Oracle Real Application Clusters 11g Essentials)
Questions et réponses: 80 Q&As

Dépenser assez de temps et d'argent pour réussir le test Oracle 1z0-593 ne peut pas vous assurer à passer le test Oracle 1z0-593 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

1z0-593 Démo gratuit à télécharger: http://www.pass4test.fr/1z0-593.html

NO.1 Choose two options that are not suitable for shared storage in a RAC 11g Release 2 database
created using DBCA.
A. Block device
B. Raw device
C. ASM
D. CFS
Answer: A,B

Oracle   1z0-593 examen   1z0-593 examen   1z0-593   1z0-593 examen   certification 1z0-593
Explanation:
Before you use DBCA to convert a single-instance database to an Oracle RAC or an
Oracle RAC One Node database, ensure that your system meets the following conditions:
/ It is a supported hardware and operating system software configuration.
/ It has shared storage: either Oracle Cluster File System (CFS) (not D) or Oracle ASM (not C) is
available and accessible from all nodes. On Linux on POWER systems, ensure that GPFS is
available and accessible from all nodes.
/ Your applications have no design characteristics that preclude their use with cluster database
processing.
Note:
*DBCA (Database Configuration Assistant) is a utility used for creating, configuring and removing
Oracle Databases.
Reference:Creating Oracle Real Application Clusters Databases with Database Configuration
Assistant
Reference:Converting to Oracle RAC and Oracle RAC One Node with DBCA

NO.2 Which command lists all the service-related information for the specified service? (crmdb is
the cluster database name and crms is the service name)
A. #crsctl config services -d cmdb -s crms
B. #srvctlconfig service -d cmdb -s crms
C. #srvctl getenv service -d crmdb -s crms
D. #crsctl status service -d crm -s crm -v
Answer: B

Oracle   1z0-593 examen   1z0-593
Explanation:
*The srvctl config command displays the Oracle Restart configuration of the specified component or
set of components.
*srvctl config service For the specified database, displays the Oracle Restart configuration
information for the specified database service or for all database services
Incorrect: Not C: getenv
Gets and displays environment variables and their values from the Oracle Restart configuration for a
database, listener, or Oracle ASM instance.
srvctl getenv Summary
CommandDescription
*srvctl getenv asm Displays the configured environment variables for the Oracle ASM instance
*srvctl getenv database Displays the configured environment variables for the specified database
instance
*srvctl getenv listener Displays the configuredenvironment variables for the specified listener
Reference:SRVCTL Command Reference for Oracle Restart

NO.3 Which step will you have to perform on Windows to restore the OCR that you did not do on
Linux?
A. Identify existing backups with the -backup option
B. Use the Service Control Panel to stop services
C. Review the contents of the backup with the ocrdump command
D. Make sure that the restored OCR files are valid
Answer: B

certification Oracle   1z0-593   1z0-593 examen   1z0-593
Explanation:
See step 2) below. Restoring the Oracle Cluster Registry on Windows-Based Systems
Use the following procedure to restore the OCR on Windows-based systems:
cluvfy comp ocr -n all [-verbose]
Note:
Restoring the Oracle Cluster Registry on UNIX-Based SystemsUse the following procedure to
restore the OCR on UNIX-based systems:
Repeat this command on each node in your Oracle RAC cluster.
Note:
Prior to running the crsctl start crs command in step 4, run the following command to verify that all
processes except init.cssd fatal are inactive:
ps -ef|grep cssd
Repeat this command on each node in your Oracle RAC cluster.
Reference: Oracle Database Oracle Clusterware and Oracle Real Application Clusters
Administration and Deployment Guide

NO.4 The Oracle Cluster Health Monitor can't _________.
A. Detect and analyze OS and duster resource for problems in Oracle Clusterware and RAC cluster
B. Track OS resource consumption at each node, process, and device level continuously
C. Be installed on Windows Server 20O3 SP1
D. Collect and analyze the cluster-wide data
Answer: C

certification Oracle   certification 1z0-593   certification 1z0-593   certification 1z0-593   1z0-593
Explanation:
Incorrect: Oracle Cluster Health Monitoris designed to detect and analyze operating system (OS) and
cluster resource related degradation and failures in order to bring more explanatory power to many
issues that occur in clusters where Oracle Clusterware and Oracle RAC are running such as node
eviction. It continuously tracks the OS resource consumption at each node, process, and device level.
It collects and analyzes this cluster-wide data. In real time mode, when thresholds are hit, an alert is
shown to the operator. For root cause analysis, historical data can be replayed to understand what
was happening at the time of failure.

NO.5 You are creating an Oracle Cluster database using DBCA. The "Memory size (SGA and PGA)"
field is supplied on value of 2000 MB. The default Block used for the database is __________.
A. 2 KB
B. 4 KB
C. 8 KB
D. 16 KB
E. 32 KB
Answer: C

certification Oracle   1z0-593   certification 1z0-593   1z0-593   1z0-593 examen
Explanation:
Note: *In the Block Size list, enter the size in bytes or accept the default. Oracle Database data is
stored in these blocks. One data block corresponds to a specific number of bytes of physical space
on disk. While using pre-defined templates, this field is not enabled since the database will be
created with the default block size of 8 KB. But while using the custom option, you can change block
size. Selecting a block size other than the default 8 KB value requires advanced knowledge and
should only be done when absolutely required.

NO.6 Which of these is not recommended as the basis for an ASM disk in a shared storage
configuration?
A. Raw disk partition
B. NFS file
C. Raw logical volumes
D. iSCSI targets
Answer: A

certification Oracle   certification 1z0-593   1z0-593 examen   certification 1z0-593   certification 1z0-593
Explanation:
*Block or raw devices are not supported by Oracle Universal Installer (OUI) or Database
Configuration Assistant (DBCA). However, manually configured raw or block devices are supported
by Oracle, but not recommended.
* Shared disk access requires some sort of networked storage
-
iSCSI (not D)
-
Fibre Channel/SCSI
-
NFS (not B)
*A logical volume issupported in less complicated configurations where a logical volume is mapped
to a LUN, or a logical volume uses disks or raw partitions.

NO.7 Which two actions do you need to take in Oracle Grid Infrastructure 11g Release 2 to enable
debugging for the resource ora.docrac.vip?
A. Make sure you are logged in as a privileged user.
B. crsctldebug res ora.docrac1.vip:1
C. crsctlset log res ora.docrac1.vip:1
D. crsctldebug log res ora.docrac1.vip:0
Answer: A,C

Oracle   certification 1z0-593   1z0-593 examen   certification 1z0-593   1z0-593 examen
Explanation:
A:You can use crsctl commands as the root user to enable dynamic debugging for the Oracle
Clusterware Cluster Ready Services (CRS), Oracle Cluster Registry (OCR), Cluster Synchronization
Services (CSS), and the Event Manager (EVM).
C: You can enable debugging for the CRS, OCR, CSS, and EVM modules and their components by
setting environment variables or by issuing crsctl debug commands using the following syntax:
crsctl debug log module_name component:debugging_level
Reference: Oracle Clusterware Administration and Deployment Guide,Component Level Debugging

NO.8 Select two Clusterware administration tasks that must be performed as the root user.
A. List the location of the voting disks.
B. Check the health and viability of the Clusterware on all nodes.
C. Disable the Clusterware from automatic start at node reboot.
D. Start the Clusterware manually on one node.
E. Check the health of the Clusterware on one node.
Answer: A,D

Oracle   1z0-593   certification 1z0-593   1z0-593 examen   1z0-593   1z0-593 examen
Explanation:
A:Voting disk management requires a valid and working OCR. Before you add, delete, replace, or
restore voting disks, run the ocrcheck command as root.
D: Example:
Restart the Oracle Clusterware stack in normal mode as root:
# crsctl start crs

NO.9 Which two options are checked by the Oracle Universal Installer, when you first install Oracle
Software on a system?
A. if the OFA-compliant path is available
B. oraInst.loc should exist
C. that the user running the installation has permissions to write to the designated path
D. that you are running OUI as a DBA user
Answer: A,B

Oracle   certification 1z0-593   1z0-593   1z0-593   1z0-593 examen
Explanation:
A:
*When installing an OFA-compliant database using Oracle Universal Installer, ORACLE_BASE is
set to /pm/app/oracle by default.
*All Oracle products on CD-ROM are OFA-compliant; that is, Oracle Universal Installer places
Oracle products in directory locations that follow OFA guidelines
B: Every Oracle software installation has an associated Central Inventory where the details of all the
Oracle products installed on a host are registered. The Central Inventory is located in thedirectory
that the inventory pointer file specifies. Each Oracle software installation has its own Central
Inventory pointer file that is unknown to another Oracle software installation.
Default Inventory Pointer File Locations
PlatformDefault Inventory Pointer Location Linux LinuxPPC /etc/oraInst.loc AIX /etc/oraInst.loc
Solaris SPARC HPUX-IA64 HPUX-PARISC /var/opt/oracle/oraInst.loc Windows Windows.X64
Windows.IA64 HKEY_LOCAL_MACHINE/Software/Oracle/inst.loc

NO.10 Once OUI recognizes a set of nodes in a cluster, which three choices does it offer when
installing the Oracle Database 11g Release 2 software?
A. You can only install the Oracle Database with the RAC option on selected nodes.
B. OUI forcesyouto configure ASM for shared storage before proceeding.
C. You can install the Oracle Database as a single instance or with the RAC option on all the nodes.
D. You can install the Oracle Database as a single instance or with the RAC option on selected nodes.
E. You can install Oracle RAC One Node.
Answer: B,D,E

certification Oracle   1z0-593   1z0-593   1z0-593
Explanation:
B, D: Complete the prerequisite tasks for converting to an Oracle RAC database:
Oracle Clusterware and Oracle Database software is installed on all target nodes.
Oracle Clusterware is started.
(D)The Oracle Database binary is enabled for Oracle RAC on all target nodes.
(B) Shared storage is configured and accessible from all nodes.
User equivalency is configured for the operating system user performing the conversion.
Enterprise Manager agents are configured and running on all nodes, and are configured with the
cluster and host information.
The database being converted has been backed up successfully.
E:Installing Oracle RAC One Node is available starting with Oracle Database 11g Release 2
(11.2.0.2).
Note:
*By default, the standard Oracle Database 11g software installation process installs the Oracle
RAC option when OUI recognizes that you are performing the installation on a cluster.

Choisir le Pass4Test vous permet non seulement à réussir le test Oracle 1z0-593, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A Oracle 1z0-593 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.

Le dernier examen Oracle 1Z1-465 gratuit Télécharger

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

La population de la Certification Oracle 1Z1-465 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Choisissez le Pass4Test, choisissez le succès de test Oracle 1Z1-465. Bonne chance à vous.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Code d'Examen: 1Z1-465
Nom d'Examen: Oracle (Oracle RightNow CX Cloud Service 2012 Essentials)
Questions et réponses: 80 Q&As

Si vous traviallez dur encore pour préparer le test de Oracle 1Z1-465 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Oracle 1Z1-465.

1Z1-465 Démo gratuit à télécharger: http://www.pass4test.fr/1Z1-465.html

NO.1 Identify the seven data types that are available as custom fields.
A. Text Area
B. Integer
C. Date Field
D. Currency
E. Date/Time
F. Text Field
G. Yes/No
H. Menu
I. Float
J. Multi Select Menu
Answer: B,C,D,E,F,G,I

Oracle examen   1Z1-465   1Z1-465

NO.2 Identify the three options available on the deployment screen in customer portal.
A. Rollback
B. Stage
C. Develop
D. Production
E. Promote
Answer: A,B,E

Oracle   certification 1Z1-465   certification 1Z1-465   1Z1-465

NO.3 You customer has added a new interface and requests that you set up three navigation sets
and associate them with three profiles.
You log in with your original credentials and add the navigation sets.
When you edit the profile and select the dropdown for the new navigation set you don't see the
navigation sets you just added.
Why can't you see the navigation set that should be displayed?
A. The profile doesn't have permission to the new interface.
B. You forgot to set the permission in the navigation set for the new interface.
C. The interface was not installed correctly.
D. You added the navigation set in the wrong interface.
Answer: A

Oracle   1Z1-465 examen   1Z1-465   1Z1-465 examen
Explanation:
Note:
*Navigation sets and custom workspaces are associated with profiles. A Profile has to have a Default
Navigation Set.
*The following items must be created before adding profiles.
Navigation sets. Profiles without navigation sets do not allow access to reports and other
components Custom workspaces (optional). If you use custom workspaces, we recommend creating
them before creating profiles so you can assign workspaces to specific profiles.
*The configuration tasks required when starting to use RightNow CX are:
Create Navigation Set
Create Workspace (optional)
Create Profile (associate Navigation Set and Workspace with the Profile)

NO.4 Your customer has asked you to create a report that shows all incidents opened within the
past month.
The report should show the following columns:
-Numberofincidents opened inthepast month
-Numberofincidents opened in the pastweek
-Numberofincidents openedin the pastday
Which two functions are needed in the expressions to create the three columns?
A. NVL
B. AVG
C. IF
D. DECODE
E. SUM
Answer: C,E

certification Oracle   certification 1Z1-465   certification 1Z1-465   1Z1-465
Explanation:
Incorrect:
Not A:In Oracle/PLSQL, the NVL function lets you substitute a value when a null value is
encountered.
Not D:DECODEcomparesexprto eachsearchvalue one by one. Ifexpris equal to asearch, then Oracle
Database returns the correspondingresult. If no match is found, then Oracle returnsdefault.
If default is omitted, then Oracle returns null.

NO.5 Identify the four guidelines that are relevant with regard to web accessibility.
A. Support increased text sizes.
B. Ensure color alone is not used to convey content.
C. Avoid background sound.
D. Ensure no underlined content exists.
E. Provide multiple methods for finding content.
F. Ensure all alternate text is unused.
Answer: A,B,C,E

Oracle   1Z1-465   1Z1-465   1Z1-465   1Z1-465 examen

NO.6 Your customer has performed a search on the knowledgebase and has stated that they are
getting strange results. Every time they search for the word "widget" the correct answer appears as
the 10th answer on the search results and not at the top of the first page.
How can you increase the value of the word "widget" In the knowledgebase search results?
A. Assign all products and categories to the knowledgebase answer.
B. Set the display position to "Fix at top."
C. Set the display position to "Place at top."
D. Add the search term to the keyword field of the knowledgebase answer.
Answer: D

certification Oracle   1Z1-465   1Z1-465   certification 1Z1-465
Explanation:
Incorrect: Not B: would ensure that widget would always be at the top over every list, but the value
of the word would not be affected.

NO.7 Your customer has requested their salesman to update record in this custom object.
What two settings in the "Salesmen" profile have to be updated to allow them access?
A. Contacts Tab: Select the Edit check box for Sales.
B. Custom Objects Tab: select the Read check box for package Name "CO" and object Name
"Salesman".
C. Service Tab: select the Add/Edit check box for incidents.
D. Custom Objects Tab: select the update check box for package Name "CO" and object name
"Salesmen"
E. Add a workspace for the Salesmen custom object.
F. Sales Tab: select the Edit check box opportunities.
G. Update the workspace for Opportunities.
Answer: D,E

Oracle   1Z1-465   1Z1-465   1Z1-465   1Z1-465

NO.8 When an incident is opened, your customer would like to have different workspaces open
based on the six products that can be selected when an incident is submitted from the Ask A
Question customer portal page.
When designing the workflow used to complete this requirement, which three elements are
necessary?
A. Entry Point
B. Load
C. Set Fields
D. Decision
E. Workspace
Answer: B,D,E

Oracle examen   1Z1-465   certification 1Z1-465   1Z1-465   1Z1-465

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Oracle 1Z1-465, la voie à la réussite de votre professionnel sera ouverte pour vous.

Guide de formation plus récente de OMG UM0-300

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A OMG UM0-300 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat OMG UM0-300 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test OMG UM0-300.

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test OMG UM0-300.

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de OMG après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Code d'Examen: UM0-300
Nom d'Examen: OMG (Omg-Certified uml professional advanded exam)
Questions et réponses: 134 Q&As

Certification OMG UM0-300 est un des tests plus importants dans le système de Certification OMG. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test OMG UM0-300 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

Vous pouvez tout d'abord télécharger le démo OMG UM0-300 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Il y a nombreux façons à vous aider à réussir le test OMG UM0-300. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test OMG UM0-300 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test OMG UM0-300 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

UM0-300 Démo gratuit à télécharger: http://www.pass4test.fr/UM0-300.html

NO.1 What does a collaboration occurrence describe?
A. a particular aspect of a collaboration
B. an object that is an instance of a collaboration
C. a collaboration that contains a set of actual instances (as opposed to roles)
D. the instantiation of the pattern specified by the corresponding collaboration
Answer: D

OMG   certification UM0-300   certification UM0-300   UM0-300 examen   UM0-300 examen

NO.2 When a component is deleted, what happens to objects in a component's namespace?
A. objects are deleted
B. objects continue to exist
C. only those objects that participate in shared aggregations are retained
D. contents of the component's namespace are promoted to its superclass
Answer: A

OMG   UM0-300 examen   UM0-300 examen   certification UM0-300

NO.3 What does a port specification on a trigger do?
A. send a request to a port
B. create a new port after a classifier has been instantiated
C. restrict the trigger to events arriving through a specific port
D. delay the creation of the parts of an encapsulated classifier until a specified request is received
Answer: C

certification OMG   UM0-300   UM0-300   UM0-300   UM0-300 examen

NO.4 In the exhibit, how many links are created by default when an instance of A is created?
A. two
B. four
C. eight
D. none
Answer: B

certification OMG   UM0-300   UM0-300   certification UM0-300

NO.5 By what means can a design document be associated with the component it describes? (Choose
three)
A. import
B. inheritance
C. ownership
D. dependency
E. power types
F. association end subsets
Answer: ACD

OMG   UM0-300   UM0-300 examen   UM0-300   UM0-300   certification UM0-300

NO.6 What happens to the exception from a RaiseExceptionAction when used in a model that has no
exception parameters declared?
A. ignored
B. handled by a default handler
C. appended to an exception log
D. sent to the "ExceptionManager" object
E. propagated to an enclosing protected node, if any
Answer: E

OMG   UM0-300   UM0-300 examen   UM0-300

NO.7 What is NOT possible when a classifier receives a request via one of its ports?
A. A new port is created on the classifier.
B. A behavior of the classifier is invoked.
C. The request is forwarded to a part of the classifier.
D. The request does not trigger any behavior and is not forwarded.
E. The port routes the request to one of a number of parts depending on the content of the request.
Answer: A

OMG   UM0-300   UM0-300 examen   UM0-300 examen

NO.8 An employee inadvertently removed all of the ownedMembers of the new BoosterMotor component
from his company's development repository. The next day, the manager was unable to find some pieces
of the BoosterMotor component's specification. What pieces could the manager no longer find? (Choose
two)
A. failure mode use cases
B. the component repository
C. test scripts for the rocket sled simulation
D. the launch assembly housing the BoosterMotor
E. the component's isIndirectlyInstantiated attribute
Answer: AC

OMG   certification UM0-300   UM0-300

NO.9 Which action does NOT require classifiers as static inputs?
A. ReadExtentAction
B. CreateObjectAction
C. ReclassifyObjectAction
D. StartOwnedBehaviorAction
E. ReadIsClassifiedObjectAction
Answer: D

OMG   UM0-300 examen   UM0-300

NO.10 What is the correct interpretation for the multiplicities in the exhibit?
A. each Company has one Job, where each Job has one employee
B. each Job is for one employer and one employee, each Company has any number of employees and
each Person has any number of employers
C. each Person has at most one Job for any number of Company objects and each Company has at most
one Job for any number of Person objects
D. each Job has any number of employers and any number of employees, each Company has any
number of employees, and each Person has any number of employers
Answer: B

OMG examen   UM0-300 examen   UM0-300   UM0-300

NO.11 What characteristics of components best enable them to be used to represent diverse and
"large-scale" aspects of information processing environments?
A. black-box semantics
B. ports, parts, and interfaces
C. duality of association ends and attributes
D. ownership of potentially large numbers of model elements
Answer: D

certification OMG   UM0-300   UM0-300

NO.12 What is a power type?
A. classifier containing a very large number of instances
B. classifier whose instances are objects of another classifier
C. classifier whose instances are operations of another classifier
D. classifier whose instances are subclasses of another classifier
Answer: D

certification OMG   UM0-300 examen   UM0-300   certification UM0-300

NO.13 An association class possesses the properties of which elements? (Choose two)
A. class
B. interface
C. constraint
D. expression
E. association
Answer: AE

OMG   UM0-300   certification UM0-300   UM0-300   certification UM0-300   certification UM0-300

NO.14 A ReplyAction always follows what action?
A. ReadExtentAction
B. AcceptCallAction
C. AcceptEventAction
D. CreateLinkObjectAction
E. StartOwnedBehaviorAction
Answer: B

certification OMG   UM0-300 examen   certification UM0-300

NO.15 What is wrong with the collaboration occurrence shown in the exhibit?
A. The <<role>> keywords are missing.
B. The <<occurrence>> keyword is missing.
C. Client and Server role names should be underlined.
D. Role bindings should be represented by dashed lines.
E. The collaboration occurrence name should be underlined.
Answer: D

OMG   UM0-300 examen   UM0-300

NO.16 Which action can continue to be enabled after it executes?
A. ReplyAction
B. ReadExtentAction
C. AcceptEventAction
D. BroadcastSignalAction
E. StartOwnedBehaviorAction
Answer: C

OMG   UM0-300   UM0-300 examen   certification UM0-300

NO.17 What does the composite structure notation show in the exhibit?
A. p is a hidden port.
B. p is a behavior port.
C. p is a port providing a system service.
D. p is a port on a part of composite C, which is not shown.
Answer: A

OMG   UM0-300   UM0-300   UM0-300

NO.18 How is a power type indicated in a diagram?
A. as a classifier labeled <<powerType>>
B. as an association line labeled <<powerType>>
C. as a generalization set labeled <<powerType>>
D. as a generalization set labeled with a colon followed by a classifier name
E. as a generalization set labeled with a colon followed by the label <<powerType>>
Answer: D

OMG   UM0-300   UM0-300   certification UM0-300

NO.19 Which stereotype is used on a dashed arrow joining an instance value to a constructor?
A. <<new>>
B. <<make>>
C. <<create>>
D. <<construct>>
E. <<initialize>>
Answer: C

OMG   UM0-300 examen   UM0-300 examen   UM0-300 examen

NO.20 Which situations would result in errors when executing a ReclassifyObjectAction on an object?
(Choose two)
A. No new classifiers are supplied.
B. A new classifier is an abstract class.
C. The old and new classifiers are identical.
D. All classifiers are removed from the object.
E. A new classifier already classifies the object.
F. An old classifier does not already classify the object.
Answer: BD

OMG examen   certification UM0-300   certification UM0-300   certification UM0-300

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel OMG UM0-300 peut vous assurer à réussir 100% le test OMG UM0-300. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Les meilleures OMG OMG-OCUP-300 examen pratique questions et réponses

Dans cette Industrie IT intense, le succès de test OMG OMG-OCUP-300 peut augmenter le salaire. Les gens d'obtenir le Certificat OMG OMG-OCUP-300 peuvent gagner beaucoup plus que les gens sans Certificat OMG OMG-OCUP-300. Le problème est comment on peut réussir le test plus facile?

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test OMG OMG-OCUP-300. Pass4Test a une expérience riche pour répondre les demandes des candidats.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel OMG OMG-OCUP-300 peut vous assurer à réussir 100% le test OMG OMG-OCUP-300. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Code d'Examen: OMG-OCUP-300
Nom d'Examen: OMG (OMG-Certified UML Professional Advanced Exam)
Questions et réponses: 134 Q&As

Dépenser assez de temps et d'argent pour réussir le test OMG OMG-OCUP-300 ne peut pas vous assurer à passer le test OMG OMG-OCUP-300 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

OMG-OCUP-300 Démo gratuit à télécharger: http://www.pass4test.fr/OMG-OCUP-300.html

NO.1 What does the composite structure notation show in the exhibit?
A. p is a port on a part of composite C, which is not shown.
B. p is a port providing a system service.
C. p is a hidden port.
D. p is a behavior port.
Answer: C

OMG examen   OMG-OCUP-300 examen   OMG-OCUP-300   certification OMG-OCUP-300   OMG-OCUP-300

NO.2 What does the protocol conformance between two protocol state machines mean?
A. the specific state machine must abide by the behavior of the general state machine
B. all triggers in the two protocol state machines must be the same
C. the two protocol state machines must be the same
D. the general state machine must abide by the behavior of the specific state machine
E. the specific state machine must have the same number of states and transitions as the general
machine
Answer: A

OMG   OMG-OCUP-300 examen   OMG-OCUP-300

NO.3 What does the composite structure notation show in the exhibit?
A. p is a hidden port.
B. p is a behavior port.
C. p is a port on a part of composite C, which is not shown.
D. p is a port providing a system service.
Answer: A

OMG examen   certification OMG-OCUP-300   OMG-OCUP-300   certification OMG-OCUP-300   OMG-OCUP-300

NO.4 When a component is deleted, what happens to objects in a component's namespace?
A. objects are deleted
B. only those objects that participate in shared aggregations are retained
C. objects continue to exist
D. contents of the component's namespace are promoted to its superclass
Answer: A

certification OMG   OMG-OCUP-300 examen   certification OMG-OCUP-300   OMG-OCUP-300

NO.5 What is true about an InformationItem in UML 2.0?
A. is not an abstraction
B. can have generalization
C. can have associations
D. is not instantiable
E. can have features
Answer: D

OMG   certification OMG-OCUP-300   OMG-OCUP-300

NO.6 Which statements are true about OCL? (Choose three)
A. OCL is a query language.
B. OCL is a programming and procedural language.
C. OCL is a typed language.
D. OCL is a procedural language.
E. OCL is a specification language.
F. OCL is a programming language.
Answer: A,C,E

OMG   OMG-OCUP-300   OMG-OCUP-300

NO.7 A ReplyAction always follows what action?
A. AcceptCallAction
B. AcceptEventAction
C. ReadExtentAction
D. CreateLinkObjectAction
E. StartOwnedBehaviorAction
Answer: A

OMG   OMG-OCUP-300   OMG-OCUP-300

NO.8 What is true about a model in UML 2.0?
A. cannot contain another model
B. can represent only software systems
C. is a kind of package
D. is a kind of component
E. can represent all system structures
Answer: C

OMG   certification OMG-OCUP-300   certification OMG-OCUP-300   certification OMG-OCUP-300

NO.9 Which UML 2.0 Superstructure package reuses the InfrastructureLibrary package?
A. Classes::Core
B. CompositeStructures::Core
C. Structures::Kernel
D. Classes::Kernel
E. Kernel::Classes
Answer: D

OMG   OMG-OCUP-300   OMG-OCUP-300   certification OMG-OCUP-300   OMG-OCUP-300

NO.10 In planning to describe (in UML) a middleware software package, a company recently acquired, which
class is most likely created to describe the package itself?
A. Manifestation
B. Device
C. DeploymentSpecification
D. ExecutionEnvironment
E. Artifact
Answer: D

certification OMG   certification OMG-OCUP-300   certification OMG-OCUP-300   OMG-OCUP-300   OMG-OCUP-300

NO.11 In the exhibit, how many links are created by default when an instance of A is created?
A. two
B. four
C. none
D. eight
Answer: B

OMG   OMG-OCUP-300   OMG-OCUP-300 examen   OMG-OCUP-300

NO.12 What is NOT possible when a classifier receives a request via one of its ports.?
A. A new port is created on the classifier.
B. A behavior of the classifier is invoked.
C. The request does not trigger any behavior and is not forwarded.
D. The request is forwarded to a part of the classifier.
E. The port routes the request to one of a number of parts depending on the content of the request.
Answer: A

OMG   OMG-OCUP-300   certification OMG-OCUP-300   certification OMG-OCUP-300

NO.13 What determines which value an object flow edge chooses to move from the source? (Choose two)
A. transformation
B. upper bound
C. ordering
D. effect
E. weight
F. selection
Answer: D,F

certification OMG   certification OMG-OCUP-300   OMG-OCUP-300 examen

NO.14 Which stereotype CANNOT be used to elaborate the semantic intent of an Artifact instance?
A. <<library>>
B. <<executable>>
C. <<script>>
D. <<source>>
E. <<specification>>
Answer: E

certification OMG   OMG-OCUP-300 examen   OMG-OCUP-300 examen

NO.15 What is wrong in this deployment diagram exhibit? (Choose two)
A. Icons are swapped.
B. Interface on Order should point up.
C. <<manifest>> arrow should have a dashed line.
D. <<manifest>> arrowhead should be hollow.
E. <<manifest>> arrowhead should be solid.
Answer: A,C

OMG examen   OMG-OCUP-300   OMG-OCUP-300 examen

NO.16 What are the ways that the UML metamodel reuses the InfrastructureLibrary package? (Choose two)
A. specializes meta-metaclasses that are defined in the InfrastructureLibrary
B. stereotypes meta-metaclasses that are defined in the InfrastructureLibrary
C. exports and generalizes metaclasses in the InfrastructureLibrary
D. imports and specializes metaclasses in the InfrastructureLibrary
E. is instantiated from meta-metaclasses that are defined in the InfrastructureLibrary
Answer: D,E

OMG   certification OMG-OCUP-300   OMG-OCUP-300   OMG-OCUP-300   OMG-OCUP-300   OMG-OCUP-300 examen

NO.17 What is a protocol of an interface?
A. procedure that implements the communications-based behavioral features of the interface
B. kind of behavior that describes the implementation of the object that realizes the interface
C. kind of state machine that defines ordering constraints on the behavioral features of the interface
D. interaction specification associated with the interface
Answer: C

certification OMG   OMG-OCUP-300   OMG-OCUP-300

NO.18 In the exhibit, what is NOT true of ReclassifyObjectAction?
A. It has an output pin providing exactly one object.
B. It refers to any number of old classifiers.
C. It refers to any number of new classifiers.
D. It has an input pin taking exactly one object.
E. The default value for replacing all old classifiers is false.
Answer: A

OMG   OMG-OCUP-300 examen   OMG-OCUP-300 examen

NO.19 How can UML be extended? (Choose two)
A. using Interface Definition Library (IDL)
B. using the Object Constraint Language (OCL)
C. using XML Metadata Interchange (XMI)
D. using profiles
E. reusing part of the UML infrastructure library and augmenting it with metaclasses and relationships
Answer: D,E

OMG   certification OMG-OCUP-300   certification OMG-OCUP-300

NO.20 The OCL dot operator may NOT traverse which classifier property?
A. operations
B. association ends
C. queries
D. attributes
Answer: A

OMG   OMG-OCUP-300 examen   OMG-OCUP-300 examen   certification OMG-OCUP-300

Le Certificat de OMG OMG-OCUP-300 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat OMG OMG-OCUP-300, c'est-à-dire avoir une grande fortune. Le Certificat OMG OMG-OCUP-300 peut bien tester des connaissances professionnelles IT. La Q&A OMG OMG-OCUP-300 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Les meilleures Novell 050-664 examen pratique questions et réponses

Le test Novell 050-664 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Novell 050-664 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Novell 050-664 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Novell 050-664 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Novell 050-664 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Novell 050-664. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Novell 050-664.

Pass4Test est un bon site d'offrir la facilité aux candidats de test Novell 050-664. Selon les anciens test, l'outil de formation Novell 050-664 est bien proche de test réel.

Code d'Examen: 050-664
Nom d'Examen: Novell (Novell edirectory design and implementation)
Questions et réponses: 140 Q&As

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Novell 050-664 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Novell 050-664. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Choisir le Pass4Test vous permet non seulement à réussir le test Novell 050-664, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A Novell 050-664 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.

050-664 Démo gratuit à télécharger: http://www.pass4test.fr/050-664.html

NO.1 Which DNS/DHCP object contains resource record sets for DNS root servers?
A.DNS Zone object
B.DNS Group object
C.DNS Locator object
D.DNS Name Server object
E.RootSrvrInfo Zone object
Correct:E

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.2 What does DSMERGE allow you to do?
A.Create replicas
B.Create partitions
C.Rename the eDirectory tree
D.Configure time synchronization
E.Rename objects within the eDirectory tree
Correct:C

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.3 Perform the following drag-and-drop task. Begin by clicking the Drag-and-Drop button. When
you finish, continue to the next question by clicking the Next button. Listed are administrator
roles and their characteristics. Drag the administrator role to its characteristic.
Correct:
Green choice1---->Yellow Choice4
Green choice2---->Yellow Choice3
Green choice3---->Yellow Choice1
Green choice4---->Yellow Choice5
Green choice5---->Yellow Choice2

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.4 After you create object naming standards, what should be defined for the attribute standards?
(Choose 2.)
A.Which object types require attributes
B.Whether the attribute of an object is required
C.Whether the attribute of an object is purgeable
D.Whether the attribute of an object is unique from other object attributes
E.Whether the attribute of an object is a system attribute that is automatically populated by eDirectory
Correct:B E

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.5 What is a good recommendation to follow when designing partitions for lower layers in the tree?
A.Create a partition for each container.
B.Partition the Directory by function regardless of location.
C.Use organizational divisions and workgroups to define lower-level partitions.
D.Place all servers, including servers at different locations, in the same partition.
E.Partition the Directory with more partitions at the top and fewer partitions at lower-levels.
Correct:C

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.6 You have just created an eDirectory tree and installed 3 servers into the tree. The tree has one
partition. Server1, Server2, and Server3 were installed into the Corp container. Server2 crashed
and you removed it from the tree before you installed additional servers. The additional servers
installed in the tree were Server4, Server5, Server6, and Server7. Server4 and Server5 were
installed into the Prod container. Server6 and Server7 were installed into the Acct container. The
Corp, Prod, and Acct containers are children of the tree root. The servers were placed in the tree
in the following order: Server4, Server5, Server6, Server7. You haven't had the chance to manually
add replicas to any server. Which servers hold replicas?
A.Server1 and Server3
B.Server1, Server3, and Server4
C.Server1, Server3, Server4, and Server6
D.Server1, Server3, Server4, and Server5
E.Server1, Server3, Server6, and Server7
F.Server1, Server3, Server4, Server5, Server6, and Server7
Correct:B

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.7 Your company has 15 sites connected by a WAN link to corporate headquarters. Corporate
headquarters has 50 servers and each of the 15 sites has 30 servers. You are implementing a
multiple time provider group time synchronization strategy. Which are considerations you should
make before implementing this strategy? (Choose 2.)
A.If possible, create local time providers.
B.There will be a single point of failure at each location.
C.You cannot exceed 7 primary time servers in your network.
D.Make sure each reference server will synchronize with the same external source.
E.The single reference time synchronization strategy will provide a better strategy for this network
structure.
Correct:A D

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.8 Which replica or replicas contain a complete copy of all object information of a partition?
A.Master
B.Master and filtered
C.Master and read/only
D.Master and read/write
E.Master,read/write, and read-only
F.Master, read/write, and filtered
G.Master, read/write, read-only, and subordinate reference
Correct:E

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.9 Which statement is true of queue-based printing?
A.The print server object must be associated with a volume object.
B.The printer object must be associated with a print server object.
C.The print queue object must be associated with a print server object.
D.The print server, print queue, and printer objects must all reside in the same container.
E.The print server, print queue, and printer objects must all reside in the same container as the
corresponding server object.
Correct:B

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.10 You have just finished executing a tree merge. Which tasks are left to complete the tree merge
process? (Choose 2.)
A.Correct bindery services commands.
B.Update workstation configurations.
C.Delete and re-create volume objects.
D.Restore the taped backup of the file system.
E.Verify trustee assignments to the file system.
Correct:A B

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.11 A secondary server is not synchronized with a single reference time server. During the next
polling process, what percent of the time difference does the secondary time server adjust?
A.0%
B.16%
C.25%
D.50%
E.75%
F.100%
Correct:F

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.12 You are implementing an NDPS printing environment. Where is it recommended to place the
NDPS print manager object in the eDirectory tree?
A.Next to user objects
B.Next to the NDPS printer object
C.In the same container where the server object resides
D.At least one level higher than the printers it manages
E.In the same container as the user object that has administrative rights to manage it
Correct:D

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.13 In which eDirectory objects do WAN traffic policies reside? (Choose 2.)
A.The Admin object
B.The Server object
C.The LAN Area object
D.Any container object
E.The partition root object
Correct:B C

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.14 Examine the exhibit by clicking the Exhibit button. Shown in the exhibit is a partition and
replica table, and a partitioned eDirectory tree. Which servers automatically receive a subordinate
reference of the PR partition?
A.Serv2, Serv5, and Serv6
B.Serv2, Serv4, and Serv6
C.Serv3, Serv5, and Serv6
D.Serv2, Serv3, Serv5, and Serv6
E.Serv2, Serv3, Serv4, Serv5, and Serv6
Correct:C

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.15 You are the network administrator for your company and are in charge of your company's
eDirectory design and implementation project. You have completed the project approach phase of
the eDirectory design cycle. Which tasks still need to be completed before you begin the
implementation phase? (Choose 2.)
A.Design the eDirectory tree
B.Fine-tune the eDirectory design
C.Determine accessibility needs
D.Plan a time synchronization strategy
E.Gather business information related to network design
Correct:A C

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.16 What does the following WAN Traffic Manager policy control? TCPIP, NA
A.Prevents background traffic generated by TCP/IP
B.Prevents background traffic unless the traffic is generated by TCP/IP
C.Restricts TCP/IP traffic unless the traffic is in the same TCP/IP network area
D.Restricts TCP/IP traffic unless the traffic comes from a different TCP/IP network area
Correct:B

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.17 You are getting ready to merge 2 eDirectory trees. What should be done before attempting to
merge trees? (Choose 2.)
A.Back up both eDirectory trees.
B.Rename the Admin user object in the target tree.
C.Remove the source server from all replica rings.
D.Use DSREPAIR to update the schema so it is the same on both servers.
E.Rename the first level container objects in both trees to be identical.
Correct:A D

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.18 You have completed a tree merge and want to confirm the new tree name by ensuring that all
servers in the tree are configured to support the new tree. Which utility will provide you the status
of every server in the tree and the name of the tree it is servicing?
A.DSMAINT
B.DSMERGE
C.DSREPAIR
D.ConsoleOne
E.NDS Manager
Correct:B

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.19 In which file do you configure time on a Linux server?
A.ntp.conf
B.init.conf
C.time.conf
D.tsync.conf
E.clock.conf
Correct:A

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

NO.20 What does WAN Traffic Manager control? (Choose 2.)
A.Events initiated by administrators or users
B.Server-to-server traffic generated by eDirectory
C.Server-to-server traffic generated by time synchronization
D.The amount of eDirectory traffic based on cost of traffic and time of day
E.Which servers the master replica server synchronizes to by using configured lists
Correct:B D

certification Novell   050-664   050-664   050-664   050-664 examen   050-664

L'importance de la position de Certificat Novell 050-664 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Novell 050-664 par votre première fois.

Guide de formation plus récente de Novell 050-694

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Novell 050-694. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

Dans cette Industrie IT intense, le succès de test Novell 050-694 peut augmenter le salaire. Les gens d'obtenir le Certificat Novell 050-694 peuvent gagner beaucoup plus que les gens sans Certificat Novell 050-694. Le problème est comment on peut réussir le test plus facile?

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Novell 050-694, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Novell 050-694. Vous aurez une space plus grande à se développer.

Choisir le Pass4Test peut vous aider à réussir 100% le test Novell 050-694 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Code d'Examen: 050-694
Nom d'Examen: Novell (Novell ZENworks 7 Desktop Management Administration)
Questions et réponses: 179 Q&As

050-694 Démo gratuit à télécharger: http://www.pass4test.fr/050-694.html

NO.1 Which object can you associate with a workstation package? (Choose 2.)
A.User
B.Alias
C.Printer
D.Profile
E.Security
F.Computer
G.Container
H.Workstation Group
Correct:G H

certification Novell   050-694   certification 050-694

NO.2 If you're using the Hosts file or DNS to provide host name resolution for your ZENworks
Automatic Workstation Import service, what host name must you configure to resolve to your
Import server's IP address?
A.ZWSREG
B.ZIMPORT
C.ZENWSREG
D.ZWSIMPORT
E.ZENWSIMPORT
F.You use your Import server's host name, such as DA1 or NTI-PROVO.
Correct:E

certification Novell   050-694   certification 050-694

NO.3 Click the Point and Click button to begin. Click on the parameter in the Myapps.html file you
would edit if you want to hide the left folder view frame of the Application Browser view.
Correct:

certification Novell   050-694   certification 050-694

NO.4 Referring to ZENworks Asset Management, what is the default port that Task Server uses?
A.997
B.7460
C.7461
D.7462
E.7465
Correct:E

certification Novell   050-694   certification 050-694

NO.5 Which DesktopDNA.exe switch configures the DNA Engine to capture a workstation's
personality?
A./C
B./A
C./P
D./U
E./DNA
F./APPLY
G./UPLOAD
H./CAPTURE
Correct:E

certification Novell   050-694   certification 050-694

NO.6 If you modify the myapps.html file on the Middle Tier Server, users who access the file from the
server have the modified version of the myapps.html file downloaded to which directory on their
Windows workstations?
A.C:\Program Files\Novell\Zenworks
B.C:\Program Files\Novell\Zenworks\Nal
C.C:\Program Files\Novell\Zenworks\Cache\Nal
D.C:\Program Files\Novell\Zenworks\Appbrowser
E.C:\Program Files\Novell\Zenworks\Nls\your_language
F.C:\Program Files\Novell\Zenworks\Nal\your_language
Correct:E

certification Novell   050-694   certification 050-694

NO.7 Which remote management utility can you use to get realtime information about the device
drivers on the controlled workstation?
A.Chat
B.Diagnostics
C.File Transfer
D.Remote View
E.Remote Execute
Correct:B

certification Novell   050-694   certification 050-694

NO.8 When installing ZENworks Desktop Management workstation agents, which information must be
configured if the Novell Client is not being used to access policies and applications? (Choose 2.)
A.The Workstation Manager agent
B.The Remote Management agent
C.The HTTP port number used by the middle tier server
D.The DNS name or IP address of the back-end server
E.The DNS name or IP address of the middle tier server
Correct:C E

certification Novell   050-694   certification 050-694

NO.9 User DGrow.MKT.SLC.DA is a member of the PowerUsers.SLC.DA group. You have associated
a user policy package with the SLC.DA container that configures user desktops to use the Rainy
Day color scheme. You've also associated a user policy package with the MKT.SLC.DA container
that configures user desktops to use the Pumpkin color scheme. You've also associated a user
policy package with DGrow.MKT.SLC.DA that configures user desktops to use the Maple color
scheme. Finally, you've associated a user policy package with PowerUsers.SLC.DA that
configures user desktops to use the Spruce color scheme. When DGrow logs in, which color
scheme will be applied to her workstation?
A.Maple
B.Spruce
C.Pumpkin
D.Rainy Day
E.The user and the group associations are in conflict and, therefore, no color scheme will be applied.
Correct:A

certification Novell   050-694   certification 050-694

NO.10 Click the Point and Click button to begin. Click on the Launcher Configuration tab you would
use if you wanted to configure an icon to be displayed for Application Explorer in your
workstations' system tray.
Correct:

certification Novell   050-694   certification 050-694

NO.11 In relation to ZENworks Desktop Management and disconnected Novell application launcher
(NAL), what can be used to distribute applications to disconnected workstations? (Choose 2.)
A.CD
B.LAN
C.DVD
D.USB Port
E.Serial Port
F.Wireless NIC
G.Firewire Port
Correct:A C

certification Novell   050-694   certification 050-694

NO.12 Which policy package is used to configure the Workstation Inventory policy?
A.User package
B.Server package
C.Container package
D.Workstation package
E.Service Location package
Correct:D

certification Novell   050-694   certification 050-694

NO.13 Click the Point and Click button to begin. Click the option in the Distribution Rules page of this
application object that will allow you to manage it in a mixed environment consisting of ZENworks
7.0 and pre-ZENworks 6.5 versions of NAL.
Correct:

certification Novell   050-694   certification 050-694

NO.14 You need to allow users the ability to uninstall a Novell application launcher (NAL) delivered
application by right-clicking the application icon and selecting uninstall. What must be done to
make this feature available? (Choose 2.)
A.An administrator must enable uninstall using a remote control agent.
B.The user must have administrator rights to be able to uninstall the application.
C.An administrator must enable uninstall in the properties of the application object.
D.An administrator must enable users to perform a manual uninstall in the properties of the application
object.
Correct:C D

certification Novell   050-694   certification 050-694

NO.15 You are installing ZENworks workstation agents and need functionality for distributing and
managing applications to associated users. Which feature should you select during installation to
obtain this functionality?
A.Workstation Imaging
B.Workstation Manager
C.Workstation Inventory
D.Remote Management
E.Application Management
Correct:E

certification Novell   050-694   certification 050-694

NO.16 Which policy package contains policies that are container specific?
A.User Policy Package
B.Server Policy Package
C.Workstation Policy Package
D.Service Location Policy Package
Correct:D

certification Novell   050-694   certification 050-694

NO.17 Which TCP port is used by the Remote Control Listener?
A.390
B.443
C.1762
D.2021
E.8009
F.8011
Correct:C

certification Novell   050-694   certification 050-694

NO.18 When using a Windows Group policy in a user policy package to import an Active Directory
group policy containing security settings, which file are the imported settings saved in by
ZENworks?
A.Zensec.inf
B.Security.inf
C.WGPsec.txt
D.Zenpolicy.inf
E.ZenADsec.inf
F.Zensettings.txt
Correct:A

certification Novell   050-694   certification 050-694

NO.19 Click the Point and Click button to begin. Click the Repackager option you would use to covert
an AOT file to an MSI package.
Correct:

certification Novell   050-694   certification 050-694

NO.20 Which type of ZENworks application can be used to deliver registry keys, INI files, text files, or
icons without actually installing an application on user workstations?
A.MSI
B.AOT
C.AXT
D.Web
E.MST
F.Simple
Correct:F

certification Novell   050-694   certification 050-694

Est-que vous s'inquiétez encore à passer le test Certification 050-694 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Novell 050-694? Si vous voulez réussir le test Novell 050-694 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Certification Novell de téléchargement gratuit pratique d'examen 50-653, questions et réponses

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Novell 50-653 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Novell 50-653, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

Si vous faites toujours la lutte contre le test Novell 50-653, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Novell 50-653. Si vous avez déjà décidé à s'améliorer via Novell 50-653, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Novell 50-653. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Code d'Examen: 50-653
Nom d'Examen: Novell (Certified Novell Administrator 5.1)
Questions et réponses: 120 Q&As

Finalement, la Q&A Novell 50-653 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Novell 50-653 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Novell, vous aurez un meilleur salaire et une plus grande space à se développer.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Novell 50-653.

50-653 Démo gratuit à télécharger: http://www.pass4test.fr/50-653.html

NO.1 .Which utilities allow you to copy a directory structure while maintaining all
NetWare information?(ChooseThree)
A. NetWare Administrator
B. NCOPY
C. FILER
D. DOS COPY command
E. NDIR
Answer: A,B,C

Novell   50-653   50-653 examen   50-653   certification 50-653   50-653

NO.2 .Property rights assigned using the Selected Properties option will not be
inherited at a lower level in the tree unless the ________ property right is granted?
A. Read
B. Write
C. Compare
D. Inheritable
E. Add/Remove self
Answer: D

Novell   50-653   50-653   50-653   certification 50-653

NO.3 .Which statement is true regarding small block sizes?
A. Small block sizes are best for large database records.
B. Small block sizes should be used if you enable blocksuballocation.
C. The server will require less memory to track the File Allocation Table.
D. The server will require more memory to track the Directory Entry Table.
Answer: D

Novell   50-653 examen   50-653   50-653

NO.4 .Which statement is true of a public access printer?
A. A public access printer has high security
B. A public access printer has a corresponding NDS object
C. A public access printer provides plug-and-print capabilities
D. A public access printer provides tighter administrative control
Answer: C

Novell   50-653 examen   50-653   50-653

NO.5 .Which Novell product will launch an application from server B when the primary
application server is down?
A. Monitor
B. Profiles
C. snAppshot
D. Application Launcher
Answer: D

Novell   50-653   50-653

NO.6 .Which statement about NDS security is true?
A. NDS security does not use inheritance.
B. All rights flow from NDS to the file system
C. The supervisor object right cannot be blocked by an IRF
D. NDS security has two distinct sets of right object and property
E. NDS security is used to manage access to NDS objects, but not their properties.
Answer: D

Novell   certification 50-653   certification 50-653   50-653

NO.7 Which extension represents the certificate license files?
Answer: NLF

Novell   50-653   certification 50-653   50-653   50-653   50-653

NO.8 .What functionality does the Help Requestor provide?
A. Provide access to online documentation
B. Provide assistance with hardware installation.
C. Provides assistance with printer configuration
D. Provides user with contact information for reporting workstation problems.
Answer: D

Novell   50-653 examen   50-653

NO.9 .Identify the benefits provided by NDPS. (Choose Three)
A. Improves network performance
B. Allows for unidirectional communications
C. Reduces network printing problems
D. Allows administrators to create and configure printer objects manually
E. Reduces administration cost
Answer: A,C,E

Novell   50-653 examen   50-653 examen   certification 50-653

NO.10 .A user has received the supervisor right to the server object. As the network
administrator of your company,
which of the following options would be worth checking to help determine where
this Supervisor right to the server is coming from? (Choose Two)
A. Check to see what effective rights [Root] has to the server object.
B. Check to see what effective rights the user object's has to the server object.
C. If the user is member of the group, check to see if that group has Supervisor
rights to volume
SYS.
D. Check to see if any inherited Rights Filters have been placed on the container
that the server object resides in.
E. Check to see if that user has been granted explicit trustee assignment to the
directory map object
Answer: A,B

Novell examen   50-653 examen   certification 50-653   50-653

NO.11 .Which symbols initiate the external execution of an EXE file in a login script?
(Choose two)
A. *
B. #
C. @
D. %
E. ''
Answer: B,C

Novell examen   50-653   50-653   50-653

NO.12 .What is accomplished by adding NAL.EXE to a login script?
A. It creates an application object
B. It associates application objects
C. It makes Application Launcher Window available
D. It installs the application and completes the discovery
Answer: C

Novell examen   50-653   certification 50-653   50-653

NO.13 .Which statement is true?
A. Rights for directories and files are the same.
B. File system security and NDS security are dependent upon each other.
C. NDS security regulates who can access files and directories in volumes.
D. A user does not need file system rights to edit files within the directory as
long as the user has the RW NDS object right to the volume.
Answer: A

Novell   50-653   50-653 examen   certification 50-653   50-653 examen

NO.14 There are two key files used when utilizing UIMPORT. Which UIMPORT file describes
how data is imported into the directory?
A. Data
B. Control
C. Form
D. Import
E. Fields
Answer: B

Novell   50-653 examen   50-653   50-653   50-653   50-653 examen

NO.15 .In which policy package or packages is the search policy contained?
A. User policy package
B. Container policy package
C. Workstation policy package
D. User and workstation policy packages
E. Workstation and container policy packages
Answer: B

Novell   50-653 examen   certification 50-653   50-653   50-653 examen   50-653

NO.16 .If NAL and Workstation Manager are not installed, then which method of registering
workstations can be used?
A. Z.E.N. work schedule
B. Login script
C. NetWare Application Launcher
D. Remote
Answer: B

Novell examen   certification 50-653   certification 50-653

NO.17 .Which toolbar buttons are used in the remote control viewing window? (Choose
Three)
A. Start button
B. Accelerated mode button
C. Full screen button
D. Navigation button
E. Application switcher button
Answer: A,D,E

Novell examen   50-653   50-653   certification 50-653

NO.18 .Which attribute prevents files from being migrated?
A. Co
B. Dc
C. Dm
D. Ec
E. Ic
F. Nc
G. HCSS
Answer: C

Novell examen   50-653   50-653 examen   50-653   50-653

NO.19 .Which utilities salvage and purge files? (Choose Two)
A. FLAG
B. FILER
C. NCOPY
D. RENDIR
E. NetWare Administrator
Answer: B,E

Novell   50-653   50-653 examen   certification 50-653   certification 50-653   50-653

NO.20 Which roles can be assigned to a controlled access printer? (Choose Three)
A. User
B. Manager
C. Operator
D. Workstation
E. Administrator
Answer: A,B,C

Novell   50-653   50-653 examen   50-653

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Novell 50-653 à la première fois.

Meilleur Novell 50-677 test formation guide

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Novell 50-677. Le guide d'étude de Pass4Test comprend les excercices de Novell 50-677 et la Q&A qui peut vous permetrre à réussir 100% le test Novell 50-677. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 50-677 est lequel très important dans les tests de Certification Novell. Pour être qualifié de Novell, on doit obtenir le passport de test Novell 50-677.

Si vous traviallez dur encore pour préparer le test de Novell 50-677 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Novell 50-677.

Code d'Examen: 50-677
Nom d'Examen: Novell (Foundations of novell Networking:netware 6)
Questions et réponses: 125 Q&As

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Novell 50-677 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Novell 50-677.

Vous pouvez tout d'abord télécharger le démo Novell 50-677 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

50-677 Démo gratuit à télécharger: http://www.pass4test.fr/50-677.html

NO.1 Someone is trying to access your network by logging in as Admin. Which is the simplest and
most effective method for preventing this type of security breach?
A.Hide the Admin object.
B.Rename the Admin object.
C.Use an IRF to prohibit global access.
D.Place an intruder detection limit on the Admin account.
E.Make another user security equivalent to the Admin object.
Correct:B

Novell   50-677   50-677   50-677

NO.2 Which are characteristics of a controlled access printer? (Choose 2.)
A.It has low security.
B.It provides plug-and print capabilities.
C.It allows for little administrative configuration.
D.It is created and administered as an eDirectory object.
E.It offers a full range of event and status notification options.
Correct:D E

Novell   50-677   50-677   50-677

NO.3 Which statements are true regarding setting identifier variables in login scripts? (Choose 2.)
A.They must be written in initial caps.
B.They must be written in lower case.
C.They must be written in upper case.
D.They must preceded by the pound (#) sign.
E.They must be preceded by the percent (%) sign.
F.They must be preceded by the underscore (_) sign.
Correct:C E

Novell   50-677   50-677   50-677

NO.4 Which MAP command creates a search drive in the last possible search position?
A.MAP L16:=.volume.ou.organization:path
B.MAP S16:=.volume.ou.organization:path
C.MAP S16:=.path:volume.ou.organization
D.MAP S26:=.volume.ou.organization:path
E.MAP S26:=.path:volume.ou.organization
Correct:B

Novell   50-677   50-677   50-677

NO.5 Which objects can be children of the tree object? (Choose 2.)
A.Admin
B.Country
C.Organization
D.License Container
E.Organizational unit
Correct:B C

Novell   50-677   50-677   50-677

NO.6 Which is the top-most object in the eDirectory tree?
A.Tree object
B.Domain object
C.Country object
D.Organization object
Correct:A

Novell   50-677   50-677   50-677

NO.7 The Rhernandez user object exists in the DEL.DIGITALAIR container. Which is an example of a
typeless distinguished name for Rhernandez?
A.RHERNANDEZ..
B.CN=RHERNANDEZ
C.RHERNANDEZ.DIGITALAIR
D..RHERNANDEZ.DEL.DIGITALAIR
E..CN=RHERNANDEZ.OU=DEL.O=DIGITALAIR
Correct:D

Novell   50-677   50-677   50-677

NO.8 You are using the default configuration on your server. To access Web Manager from your
workstation, you open a browser, enter the server's IP address, and then enter which port number?
A.443
B.636
C.2200
D.8008
E.8009
Correct:C

Novell   50-677   50-677   50-677

NO.9 What is used to load the print service manager?
A.iManager
B.ConsoleOne
C.NDPS Broker
D.Server console prompt
Correct:D

Novell   50-677   50-677   50-677

NO.10 Click the Exhibit Button to Begin. The Exhibit contains the Novell Client for Windows 2000
property page. Which tab allows you to control the configuration setting of Network
Neighborhood to hide the server page?
A.Client
B.Advanced Login
C.Default Capture
D.Location Profiles
E.Advanced Menu Settings
Correct:E

Novell   50-677   50-677   50-677

NO.11 Which statements are true regarding the Public trustee? (Choose 2.)
A.The Public trustee is the tree object.
B.By default, all eDirectory objects are security equivalent to Public.
C.By default, Public allows users to view any other object in the tree before authenticating.
D.By default, users must be authenticated before receiving rights through the Public trustee.
E.Any rights assigned by the tree object take precedence to rights assigned by the Public trustee.
Correct:B C

Novell   50-677   50-677   50-677

NO.12 Which utility's only function is to set directory and file attributes?
A.Flag
B.Filer
C.NDIR
D.NCOPY
Correct:A

Novell   50-677   50-677   50-677

NO.13 Click the Point-and-Click button to begin. You are setting up a GroupWise rule to forward all
messages received from your manager. Click the button or option that allows you to forward the
message.
Correct:

Novell   50-677   50-677   50-677

NO.14 Enter the console command that improves security by not allowing a malicious NLM to be run
from the floppy disk drive. Answer:
A.SECURECONSOLE
Correct:A

Novell   50-677   50-677   50-677

NO.15 How are file system effective rights calculated?
A.All rights granted to the user explicitly and through other objects, minus IRFs
B.Between explicit assignments and assignments through other objects the most restrictive rights are
applied, minus IRFs
C.Between explicit assignments and assignments through other objects the least restrictive rights are
applied, minus IRFs
D.The least restrictive rights granted to the user through eDirectory and the most restrictive granted to the
user through the file system, minus IRFs
Correct:A

Novell   50-677   50-677   50-677

NO.16 Click the Drag-and-Drop button to begin. Match each NetWare 6 feature with its description.
Correct:
Green choice3---->Yellow Choice1
Green choice4---->Yellow Choice2
Green choice2---->Yellow Choice3
Green choice1---->Yellow Choice4

Novell   50-677   50-677   50-677

NO.17 Which statements regarding login scripts are true? (Choose 2.)
A.The default login script can be edited.
B.Only one profile login script per user is allowed.
C.It is recommended to use user login scripts rather than container login scripts.
D.If the user login script is executed, the default login script is never executed.
E.Even if a user's parent container does not have a login script, a different container login script can be
executed for that user.
Correct:B D

Novell   50-677   50-677   50-677

NO.18 In an NDPS environment, which type of notification needs to be configured for a printer
operator to be notified when intervention is required?
A.Popup
B.Log-file
C.Job-owner
D.Programmatic
E.Interested-party
Correct:E

Novell   50-677   50-677   50-677

NO.19 In an NDPS printing environment, which utility do you use to configure event notification?
A.iMonitor
B.iManager
C.ConsoleOne
D.Remote Manager
E.NetWare Administrator
Correct:E

Novell   50-677   50-677   50-677

NO.20 Which email program only offers a client side (front-end) application?
A.Lotus
B.Eudora
C.Exchange
D.GroupWise
Correct:B

Novell   50-677   50-677   50-677

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Novell 50-677. Pass4Test a une expérience riche pour répondre les demandes des candidats.