La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test CheckPoint 156-315.71.
Le test CheckPoint 156-315.71 est l'un très improtant dans tous les tests de Certification CheckPoint, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Code d'Examen: 156-315.71
Nom d'Examen: CheckPoint (Check Point Certified Security Expert R71)
Questions et réponses: 480 Q&As
Il demande les connaissances professionnelles pour passer le test CheckPoint 156-315.71. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat CheckPoint 156-315.71, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Le Certificat de CheckPoint 156-315.71 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification CheckPoint 156-315.71, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 156-315.71 sans aucun éffort, en même temps, le test de CheckPoint 156-315.71 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test CheckPoint 156-315.71 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
156-315.71 Démo gratuit à télécharger: http://www.pass4test.fr/156-315.71.html
NO.1 ________is a proprietary Check Point protocol. it is the basis for Check Point ClusterXL inter-module
communication.
A. RDP
B. CCP
C. CKPP
D. HA OPCODE
Answer: B
CheckPoint examen certification 156-315.71 156-315.71
NO.2 John is configuring a new R71 Gateway cluster but he can not configure the cluster as Third Party IP
Clustering because this option is not available in Gateway Cluster Properties: What's happening?
A. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance B .Third
Party Clustering is not available for R71 Security Gateways.
B. ClusterXL needs to be unselected to permit 3rd party clustering configuration.
C. John has an invalid ClusterXL license.
Answer: C
CheckPoint certification 156-315.71 156-315.71 certification 156-315.71 156-315.71 examen
NO.3 You are MegaCorp Security Administrator. This company uses a firewall cluster, consisting of two
cluster members. The cluster generally works well but one day you find that the cluster is behaving
strangely. You assume that there is a connectivity problem with the cluster synchronization cluster link
(cross-over cable).
Which of the following commands is the best for testing the connectivity of the crossover cable?
A. telnet <IP address of the synchronization interface on the other cluster member>
B. arping <IP address of the synchronization interface on the other cluster member>
C. ifconfig a
D. Ping <IP address of the synchronization interface on the other cluster member>
Answer: B
certification CheckPoint 156-315.71 examen 156-315.71 examen certification 156-315.71 156-315.71 certification 156-315.71
NO.4 Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120
seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection
sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C
CheckPoint 156-315.71 156-315.71 156-315.71 156-315.71 156-315.71
NO.5 How does a cluster member take over the VIP after a failover event?
A. Ping the sync interface
B. if list -renew
C. Broadcast storm
D. Gratuitous ARP
Answer: D
CheckPoint examen certification 156-315.71 certification 156-315.71 156-315.71 156-315.71
NO.6 When you check Web Server in a host-node object, what happens to the host?
A. The Web server daemon is enabled on the host.
B. More granular controls are added to the host, in addition to Web Intelligence tab settings.
C. You can specify allowed ports in the Web server's node-object properties. You then do not need to list
all allowed ports in the Rule Base.
D. IPS Web Intelligence is enabled to check on the host.
Answer: B
certification CheckPoint certification 156-315.71 certification 156-315.71 certification 156-315.71
NO.7 You want to verify that your Check Point cluster is working correctly. Which command line tool can you
use?
A. cphaconf state
B. cphaprob state
C. cphainfo-s
D. cphastart -status
Answer: B
CheckPoint 156-315.71 156-315.71 examen certification 156-315.71 156-315.71
NO.8 You are establishing a ClusterXL environment, with the following topology: External interfaces
192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same
VLAN switch. Internal interfaces 172.16 10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the
synchronization network. The Security Management Server is located on the internal network with IP
172.16.10.3. What is the problem with this configuration?
A. There is an IP address conflict
B. The Security Management Server must be in the dedicated synchronization network, not the internal
network.
C. The Cluster interface names must be identical across all cluster members.
D. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B
CheckPoint examen 156-315.71 examen 156-315.71 156-315.71 examen certification 156-315.71 156-315.71
NO.9 Which procedure creates a new administrator in SmartWorkflow?
A. Run cpconfig, supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
B. In SmartDashboard, click SmartWorkflow / Enable SmartWorkflow and the Enable SmartWorkflow
wizard will start. Supply the Login Name, Profile Properties, Name, Access Applications and Permissions
when prompted.
C. On the Provider-1 primary MDS, run cpconfig, supply the Login Name, Profile Properties, Name,
Access Applications and Permissions.
D. In SmartDashboard, click Users and Administrators right click Administrators / New Administrator and
supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
Answer: D
certification CheckPoint 156-315.71 156-315.71 examen
NO.10 Which of the following manages Standard Reports and allows the administrator to specify automatic
uploads of reports to a central FTP server?
A. Smart Dashboard Log Consolidator
B. Security Management Server
C. Smart Reporter Database
D. Smart Reporter
Answer: D
CheckPoint 156-315.71 156-315.71
NO.11 Control connections between the Security Management Server and the Gateway are not encrypted by
the VPN Community. How are these connections secured?
A. They are encrypted and authenticated using SIC.
B. They are not encrypted, but are authenticated by the Gateway
C. They are secured by PPTP
D. They are not secured.
Answer: D
certification CheckPoint certification 156-315.71 156-315.71 examen certification 156-315.71 156-315.71
NO.12 Which of the following is NOT a feature of ClusterXL?
A. Enhanced throughput in all ClusterXL modes (2 gateway cluster compared with 1 gateway)
B. Transparent failover in case of device failures
C. Zero downtime for mission-critical environments with State Synchronization
D. Transparent upgrades
Answer: C
CheckPoint examen certification 156-315.71 certification 156-315.71 certification 156-315.71
NO.13 Which of the following commands can be used to stop Management portal services?
A. fw stopportal
B. cpportalstop
C. cpstop / portal
D. smartportalstop
Answer: D
CheckPoint 156-315.71 156-315.71 examen 156-315.71 certification 156-315.71 156-315.71
NO.14 Which external user authentication protocols are supported in SSL VPN?
A. LDAP, Active Directory, SecurID
B. DAP, SecurID, Check Point Password, OS Password, RADIUS, TACACS
C. LDAP, RADIUS, Active Directory, SecurID
D. LDAP, RADIUS, TACACS, SecurID
Answer: B
CheckPoint certification 156-315.71 156-315.71 certification 156-315.71
NO.15 You need to publish SecurePlatform routes using the ospf routing protocol. What is the correct
command structure, once entering the route command, to implement ospf successfully?
A. Run cpconfig utility to enable ospf routing
B. ip route ospf
ospf network1
ospf network2
C. Enable
Configure terminal
Router ospf [id]
Network [network] [wildmask] area [id]
D. Use DBedit utility to either the objects_5_0.c file
Answer: C
CheckPoint 156-315.71 156-315.71 examen 156-315.71
NO.16 What is a task of the SmartEvent Correlation Unit?
A. Add events to the events database.
B. Look for patterns according to the installed Event Policy.
C. Assign a severity level to an event
D. Display the received events.
Answer: B
CheckPoint 156-315.71 156-315.71 examen certification 156-315.71 certification 156-315.71
NO.17 Organizations are sometimes faced with the need to locate cluster members in different geographic
locations that are distant from each other. A typical example is replicated data centers whose location is
widely separated for disaster recovery purposes.
What are the restrictions of this solution?
A. There are no restrictions.
B. There is one restriction: The synchronization network must guarantee no more than 150 ms latency
(ITU Standard G.114).
C. There is one restriction: The synchronization network must guarantee no more than 100 ms latency.
D. There are two restrictions: 1. The synchronization network must guarantee no more than 100ms
latency and no more than 5% packet loss. 2. The synchronization network may only include switches and
hubs.
Answer: D
CheckPoint 156-315.71 examen 156-315.71 examen 156-315.71 certification 156-315.71
NO.18 Refer to Exhibit:
Match the ClusterXL Modes with their configurations
A. A-3, B-2, C-1, D-4
B. A-3, B-2, C-4, D-1
C. A-2, B-3, C-4, D-1
D. A-2, B-3, C-1, D-4
Answer: C
CheckPoint certification 156-315.71 156-315.71 examen 156-315.71 examen 156-315.71
NO.19 What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setsync 0
B. fw ctl sysnstat stop
C. fw ctl sysnstat off
D. fw ctl setsyns off
Answer: D
CheckPoint 156-315.71 156-315.71
NO.20 Check point Clustering protocol, works on:
A. UDP 8116
B. UDP 500
C. TCP 8116
D. TCP 19864
Answer: A
CheckPoint 156-315.71 156-315.71 examen
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification CheckPoint 156-315.71. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test CheckPoint 156-315.71. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
没有评论:
发表评论