Dernières Avaya 7004.1 examen pratique questions et réponses

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Avaya 7004.1 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Le produit de Pass4Test peut assurer les candidats à réussir le test Avaya 7004.1 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Code d'Examen: 7004.1

Nom d'Examen: Avaya (Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam)

Questions et réponses: 66 Q&As

C'est sûr que le Certificat Avaya 7004.1 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Avaya 7004.1, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Avaya 7004.1 peut bien tester la professionnalité de IT.

Vous allez choisir Pass4Test après essayer une partie de Q&A Avaya 7004.1 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Avaya 7004.1.

7004.1 Démo gratuit à télécharger: http://www.pass4test.fr/7004.1.html

NO.1 Click the Exhibit button.
Consider a company ¯ s d i a li ng p l an sho w n i n t he exh i b it and an exa m p l e f o r it s r equ ir e m en t s :
A station user at the company, with Location Code 221, placed an ESN call, dialing 7-221-2581. This
would be an On-Net call and the NARS programming must remove the LOC code and dial the DN
internally.
What programming would remove the location code for a call dialed within the originating Communication
Server 1000 to a DN on that same Communication Server 1000?
A. Each site would have its own Location Code programmed as a Home Location Code(HLOC) under
Translation Table #1 in their CS 1000.
B. The location codes for each site would be programmed under the LOC programming in Translation
Table #2 at all locations.
C. Home NPA Codes (HNPA) for each site would be programmed under Translation Table #1 at each
location in their CS 1000.
D. Each site would have the Location Codesfor all sites programmed as Home Location Codes (HLOC) in
Translation Table #1 of their CS 1000.
Answer: A

Avaya   certification 7004.1   7004.1   certification 7004.1

NO.2 A customer has a Communication Server 1000 RIs. 7 x system at their site. You have been asked to
add the Call Pickup feature to the ten IP telephones in the sales department. The customer wants to be
sure active calls are not lost when the change are made.
Which Phones Configuration feature can be enabled allowed you to ensure changes to the telephones
are not transmitted to the call server until the telephone is not busy?
A. Bulk change
B. Courtesy change
C. Group change
D. Template change
Answer: B

Avaya   7004.1 examen   7004.1   7004.1   7004.1

NO.3 For a situation where you use the CDP feature at a switch equipped with the MARS software package,
which statement are correct? (Choose two)
A. Use steering codes tor CDP calls that are the same as the assignedNARS Access Cades.
B. Use steering codes tor CDP calls that aredistinct from thoseassigned NARS Access Cades.
C. You can integrate CDP numbers with the NARS Uniform Dialing Plan (UDP).
D. Youcannot shareRoute Lists,Digit Manipulation tables and Time-of-Day schedule withNARS.
Answer: B,C

certification Avaya   7004.1 examen   7004.1

NO.4 The Satellite Link Control feature ensures that the configuration of a call does not include more than one
communications satellite trunk. Tandem trunk calls, when connected through more than one
communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the
Communication Server 1000?
A. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 signaling.
Route must be designated as a satellite route.
B. Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
C. Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling
Route must be designated as a satellite route.
D. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)
Answer: A

certification Avaya   certification 7004.1   7004.1   7004.1

NO.5 Click the Exhibit button.
Given the customer ¯ s p r og r a mm ed da t abase sho w n i n t he exh i b it and AC 1 = 9 , ove r w h i ch R L I w ill a ca ll
placed to 9-1-912-534-2222 complete?
A. RLI 9
B. RLI 4
C. RLI 3
D. RLI 2
E. call will not complete as dialed
Answer: B

Avaya   7004.1   certification 7004.1

NO.6 Click the Exhibit button.
Given the customer Route List index shown in the exhibit, what is the first expensive route that a
call placed on that RLI could take?
A. Entry 0
B. Entry 1
C. Entry 2
D. Entry 3
Answer: C

Avaya   certification 7004.1   7004.1   7004.1 examen

NO.7 An administrator is programming an NRS for the first time on a new Communication Server 1000
system RIS. 7.0 system. When attempting to add the Service Domain, it cannot be added as the Add
button is grayed out in the NRS.
Which tasked should you perform to resolve this issue?
A. reinstall the Signaling Server Software
B. reinstall the NRS software
C. switch from Standby database to Active database
D. switch from Active database to Standby database
Answer: D

Avaya   certification 7004.1   7004.1

NO.8 A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. Their sales
department is expanding and you have been asked to add Ave new telephones with the same capabilities
as the existing telephones in the department.
Which programming command should you use to complete this task.?
A. Move to DN
B. Move from TN
C. Copy from DN
D. Copy from TN
Answer: D

Avaya   7004.1 examen   certification 7004.1   7004.1 examen

NO.9 Click the Exhibit button.
A customer has asked if the Communication Server 1000 RIs. 7 x system can route anyone that dial an
unassigned number in the customer ¯ s D I D r ange t o t he A tt endan t.
In reviewing the current configuration as shown in the exhibit, what do you conclude?
(Choose two)
A. only internalstation users are routing to the Attendant
B. internal station users and non tie line users are routing to the Attendant
C. all caller types are receiving an overflow tone
D. NET_DATA Attendant and tie trunk users are receiving an overflow tone
Answer: B

Avaya   7004.1 examen   certification 7004.1   7004.1 examen   7004.1

NO.10 Click the Exhibit button.
Given the SDRR programming options shown in the exhibit, which SDRR programming would allow a
user to dial 1-900-867-3333, but not successfully dial any other 1-900 based number?
A. Table 1
B. Table 2
C. Table 3
D. Table 4
Answer: A

Avaya   7004.1 examen   7004.1   certification 7004.1   7004.1 examen   7004.1

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Avaya 7004.1. Les documentations particulièrement visée au test Avaya 7004.1 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Avaya 7004.1.