Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification HP HP0-Y17. Il n'y a pas de soucis à réussir le test avec une haute note.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel HP HP0-Y17 peut vous assurer à réussir 100% le test HP HP0-Y17. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Pass4Test est un site d'offrir la bonne Q&A HP HP0-Y17. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.
Après une longue attente, les documentations de test HP HP0-Y17 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test HP HP0-Y17 à la première fois.
Peut-être vous voyez les guides d'études similaires pour le test HP HP0-Y17, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test HP HP0-Y17 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
Code d'Examen: HP0-Y17
Nom d'Examen: HP (ProCurve Secure Mobility Solutions)
Questions et réponses: 118 Q&As
Selon les anciens test HP HP0-Y17, la Q&A offerte par Pass4Test est bien liée avec le test réel.
HP0-Y17 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y17.html
NO.1 The management interface for the IDS on a Wireless Edge Services zl Module reports that the
configured threshold for excessive association attempts by a station is set to 0. What does this indicate?
A. The IDS has not detected any events of this type.
B. The IDS is not scanning for this type of event.
C. No RPs have been configured for intrusion detection.
D. No users are associated with WLANs configured for intrusion detection.
Answer: B
HP HP0-Y17 examen certification HP0-Y17 certification HP0-Y17
NO.2 Which ProCurve secure mobility solution requires the installation of a RADIUS agent on the enterprise
RADIUS server?
A. Access Point 530
B. Identity Driven Manager
C. ProCurve Mobility Manager
D. Wireless Edge Services zl Module
Answer: B
HP certification HP0-Y17 certification HP0-Y17 certification HP0-Y17 HP0-Y17
NO.3 When is the intrusion detection capability enabled on the Wireless Edge Services zl Module?
A. when routing is enabled
B. when the module is installed
C. when the first WLAN is enabled
D. when the built-in firewall is enabled
Answer: B
HP HP0-Y17 HP0-Y17 certification HP0-Y17 certification HP0-Y17
NO.4 At a customer site, you must configure a Switch 5400zl and Identity Driven Manager to authenticate
Sales users and place them in VLAN 48. Which steps are necessary to complete this configuration?
(Select three.)
A. Configure VLAN 48 on the Switch 5400zl.
B. Enable 802.1X authentication for all affected switch ports.
C. Assign all affected switch ports to VLAN 48 as tagged members.
D. Define VLAN 48 as the unauthorized VID for all affected switch ports.
E. Add all Sales users to the list of RADIUS clients on the authentication server.
F. Define an IDM Access Profile and Access Rule associating Sales users with VLAN 48.
Answer: ABF
HP HP0-Y17 certification HP0-Y17 HP0-Y17 HP0-Y17 examen HP0-Y17
NO.5 At a customer site, you have configured a Guest WLAN on a Wireless Edge Services zl Module. The
WLAN will use Web-Auth to authenticate Guest users, who will be placed in VLAN 55. What other step is
required to enable this configuration?
A. Enable IP routing for all VLANs configured on the module.
B. Configure a static route to VLAN 55 on the enterprise's routers.
C. Configure an IP interface associated with VLAN 55 on the module.
D. Add the address of the VLAN 55 default gateway to the module's Allowed List.
Answer: C
HP HP0-Y17 HP0-Y17 examen HP0-Y17
NO.6 You have configured 802.1X authentication for four ports on a Switch 2600-8-PWR. One of the ports is
connected to an AP 530 in a conference room at a customer site. To ensure users connecting through
both devices have the same access rights, you have added the switch ports to an IDM Location that
already includes the AP 530. During a test, users connecting to the AP 530 are assigned to the correct
Access Policy. Users connecting through the switch ports receive the Default Access Policy. How can you
correct this configuration?
A. Edit the Location to support 802.1X over wired devices.
B. Add the switch and the AP 530 to the same group in Mobility Manager.
C. Configure 802.1X authentication on the switch port connected to the AP.
D. Set the WLAN parameter to ANY in the IDM Access Rule for the users.
Answer: D
certification HP HP0-Y17 HP0-Y17 HP0-Y17 certification HP0-Y17
NO.7 At a customer site, you have enabled routing on a Wireless Edge Services zl Module installed in a
5406zl switch. Under what circumstance is configuration of a default route on the module unnecessary?
A. when the 5406zl is the only router adjacent to the Wireless Module
B. when RIP is configured on the router upstream from the Wireless Module
C. when VLANs configured on the Wireless Module also are configured on other routers
D. when a default gateway has already been defined on the Wireless Module to enable Layer 2
connectivity
Answer: D
HP HP0-Y17 examen certification HP0-Y17 HP0-Y17 examen HP0-Y17
NO.8 You have configured AP detection on two Radio Ports connected to a Wireless Edge Services zl
Module. Which step is necessary to enable ProCurve Manager Plus with Mobility Manager to display
information about the detected APs?
A. Configure IP addresses on the RPs.
B. Configure SNMP traps on the Wireless Module.
C. Define a detection alert in the PCM+ Events viewer.
D. Add the RPs to a detection group in Mobility Manager.
Answer: B
HP HP0-Y17 examen certification HP0-Y17 HP0-Y17 examen HP0-Y17 examen
NO.9 On the Wireless Edge Services zl Module, which interfaces can be associated with a single IP ACL?
A. all VLAN interfaces and the downlink
B. all VLAN interfaces, the downlink, and the uplink
C. one VLAN interface, the downlink, and the uplink
D. all VLAN interfaces and either the downlink or the uplink
Answer: B
HP examen HP0-Y17 examen HP0-Y17 HP0-Y17
NO.10 What is an advantage of configuring a ProCurve Radio Port for passive scanning instead of dedicated
scanning for rogue AP detection?
A. The RP can continue serving clients while scanning.
B. The RP can be assigned to a Quarantine VLAN in PCM+.
C. The RP can be configured to scan selected radio frequencies.
D. The RP can send SNMP traps to PCM+ when rogue APs are detected.
Answer: A
certification HP HP0-Y17 HP0-Y17 examen HP0-Y17 examen HP0-Y17 HP0-Y17
NO.11 You must configure an ACL on a Wireless Edge Services zl Module, and attach the ACL to VLAN 55.
This VLAN is associated with the Marketing WLAN on the module and does not exist on any other
infrastructure device in the customer network. When will traffic be filtered by this ACL?
A. when it arrives on VLAN 55 from a wireless client
B. only when it is forwarded from the module downlink to the module uplink
C. when it arrives from the wired network and is forwarded to VLAN 55 hosts
D. when it is routed from VLAN 55 to another VLAN configured on the module
Answer: D
HP certification HP0-Y17 certification HP0-Y17
NO.12 What is an advantage of implementing Layer 3 routing instead of Layer 2 forwarding on the Wireless
Edge Services zl Module?
A. It enables termination of user VLANs at the network edge.
B. It enables wireless users to have different access than wired users.
C. It enables the application of different security policies for wired and wireless users.
D. It enables communication between wireless users without using resources of the switch hosting the
module.
Answer: A
HP HP0-Y17 HP0-Y17 HP0-Y17
NO.13 What is the rule governing the number and type of ACLs that can be applied to a VLAN on a Wireless
Edge Services zl Module?
A. The VLAN can support one IP ACL.
B. The VLAN can support one IP ACL or one MAC ACL.
C. The VLAN can support one IP ACL and one MAC ACL.
D. The VLAN can support all ACLs configured on the module.
Answer: A
certification HP certification HP0-Y17 HP0-Y17 certification HP0-Y17 certification HP0-Y17
NO.14 Which configuration step will enable a ProCurve Radio Port to obtain the IP address of a Wireless
Module during Layer 3 adoption?
A. Configure DHCP Relay on the Wireless Module.
B. Define the Wireless Module as a RADIUS client in Windows IAS.
C. Define Option 189 on the DHCP server for the scope serving the RP.
D. Configure IP helper on the RP's default gateway to forward requests to the Wireless Module's DHCP
server.
Answer: C
HP examen HP0-Y17 HP0-Y17 HP0-Y17 certification HP0-Y17
NO.15 What is the purpose of the Guest Login feature on the AP 530?
A. enable guests to use the built-in guest account for Web-Auth
B. enable guests to register as users during the log-in process
C. enable guests to obtain certificates necessary for 802.1X authentication
D. enable guests to obtain IP addresses local to the AP during authentication
Answer: A
HP HP0-Y17 examen HP0-Y17 HP0-Y17
NO.16 Which option is provided by the advanced customization feature for Web-Auth pages on the Wireless
Edge Services zl Module?
A. the ability to customize logos and text on Web-Auth pages
B. the ability to use Web-Auth pages stored on an external web server
C. the ability to install and use customized Web-Auth pages on the module
D. the ability to display different Web-Auth pages for failed and successful authentication
Answer: C
HP HP0-Y17 certification HP0-Y17 HP0-Y17 HP0-Y17
NO.17 Which statement describes the relationship between Identity Driven Manager and an enterprise
RADIUS server?
A. IDM acts as a graphical interface for the configuration of RADIUS policies.
B. IDM provides a RADIUS proxy server for users affected by IDM Access Rules.
C. IDM applies the RADIUS server's Remote Access Policies to authenticated users.
D. IDM enables the RADIUS server to specify VLAN assignments for authenticated users.
Answer: A
HP examen HP0-Y17 HP0-Y17
NO.18 Which feature of the Wireless Edge Services zl Module enables the reporting of excessive
authentication attempts?
A. AP detection
B. built-in firewall
C. Access Control Lists
D. Intrusion Detection System
Answer: D
HP HP0-Y17 certification HP0-Y17
NO.19 Which circumstance requires Layer 3 adoption of a radio port by a Wireless Edge Services zl Module?
A. The RP must be part of a Layer 3 mobility domain.
B. The RP is located in a different broadcast domain than the module's downlink.
C. The RP must support users who will be assigned IP addresses in different networks.
D. The RP must obtain an IP address for enforcement of ACLs configured on the module.
Answer: B
HP certification HP0-Y17 HP0-Y17 HP0-Y17 HP0-Y17
NO.20 At a customer site, you have enabled and activated 802.1X authentication for ports 1-4 on a Switch
3500yl. VLAN membership of the ports is at default settings. Users connecting to the switch will
authenticate using Windows IAS and be assigned to VLANs based on policies applied by Identity Driven
Manager. You enter the following command:
3500.l(config)#aaa port-access authenticator ethernet 1-4 unauth-vid 33
What is the VLAN membership of these ports while no clients are connected?
A. VLAN 1
B. VLAN 33
C. VLAN assigned by IDM
D. VLAN assigned by RADIUS server
Answer: A
HP HP0-Y17 certification HP0-Y17 HP0-Y17
NO.21 What is a difference between the Web-Auth features on the AP 530 and the Wireless Edge Services zl
Module?
A. The AP 530 does not support 802.1X for Web-Auth clients.
B. The AP 530 does not support WPA encryption for Web-Auth clients.
C. The AP 530 does not support customization of text on the Login page.
D. The AP 530 does not enable the loading of custom web pages from external servers.
Answer: D
certification HP certification HP0-Y17 HP0-Y17 examen
NO.22 You must configure a Wireless Edge Services zl Module so that clients will be subject to router-based
ACLs based on IP address range. Which module feature enables you to support this strategy?
A. DHCP relay
B. Layer 3 mobility
C. built-in RADIUS server
D. dynamic VLAN assignment
Answer: D
HP certification HP0-Y17 HP0-Y17
NO.23 At a customer site, you must configure three ports on a Switch 2610-24-PWR to authenticate users as
part of a unified wired and wireless solution that will use Identity Driven Manager to apply access policies.
Which device's IP address do you require for this configuration?
A. RADIUS server
B. PCM+/IDM server
C. Certification Authority
D. Windows Domain Controller
Answer: A
HP HP0-Y17 HP0-Y17 HP0-Y17 examen HP0-Y17 examen HP0-Y17
NO.24 By default, which port or ports become members of VLAN 2100 when a Wireless Edge Services zl
Module is installed in a 5406zl switch?
A. Wireless Module uplink port
B. ports where PoE is enabled
C. Wireless Module downlink port
D. ports connected to PoE switches
Answer: C
HP examen HP0-Y17 HP0-Y17 certification HP0-Y17 HP0-Y17
NO.25 What is an advantage of using the Wireless Module instead of the AP 530 to detect rogue APs?
A. The Wireless Module supports passive scanning as well as dedicated scanning.
B. The Wireless Module can be configured to require APs to submit 802.1X credentials.
C. The Wireless Module provides an administrative interface for identifying authorized and unauthorized
APs.
D. The Wireless Module's built-in firewall prevents users associated with unauthorized APs from
accessing network resources.
Answer: C
HP certification HP0-Y17 HP0-Y17 HP0-Y17 HP0-Y17 HP0-Y17 examen
NO.26 In Identity Driven Manager, what is the default setting for access control based on time of connection?
A. Access is allowed at all times.
B. Access is not permitted at any time.
C. Access is permitted during normal business hours.
D. Access is permitted at times configured during installation.
Answer: A
HP HP0-Y17 HP0-Y17
NO.27 When routing is enabled on a Wireless Module, which configuration is necessary on adjacent
enterprise routers?
A. a dynamic routing protocol such as RIP or OSPF
B. interfaces in all VLANs configured on the Wireless Module
C. DHCP relay for all VLANs configured on the Wireless Module
D. static routes to IP networks configured on the Wireless Module
Answer: D
HP HP0-Y17 examen HP0-Y17 certification HP0-Y17 HP0-Y17 examen
NO.28 Which secure mobility features are available on a standalone AP 530? (Select two.)
A. Web-Auth
B. built-in firewall
C. built-in RADIUS
D. VLAN-based ACLs
E. user-based policies
Answer: AC
certification HP HP0-Y17 examen HP0-Y17 examen certification HP0-Y17
NO.29 You must configure Identity Driven Manager to control access for five user groups to a file server at a
customer site. Which IDM object must be configured to enable you to identify this server in Access Rules?
A. Location
B. Access Policy
C. Access Profile
D. Network Resource
Answer: D
HP HP0-Y17 examen HP0-Y17 HP0-Y17
NO.30 What is an advantage of using Web-Auth, instead of 802.1X, for authentication of guests?
A. Web-Auth eliminates the need for data encryption.
B. Web-Auth places less load on enterprise RADIUS servers.
C. Web-Auth does not require the installation of supplicant software on client computers.
D. Web-Auth enables the authentication of devices that do not provide interfaces for users to enter
credentials.
Answer: C
certification HP HP0-Y17 examen HP0-Y17 HP0-Y17
Participer au test HP HP0-Y17 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat HP HP0-Y17 symbole bien la professionnalité d'un travailleur dans cette industrie.
没有评论:
发表评论