C'est pas facile à passer le test Certification HP HP0-S32, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test HP HP0-S32 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test HP HP0-S32, vous allez passer le test HP HP0-S32 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
Pass4Test est un site d'offrir la bonne Q&A HP HP0-S32. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test HP HP0-S32 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
Code d'Examen: HP0-S32
Nom d'Examen: HP (HP BladeSystem Networking 2011)
Questions et réponses: 136 Q&As
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification HP HP0-S32. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification HP HP0-S32.
HP0-S32 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-S32.html
NO.1 What are valid FlexNIC bandwidth selections? (Select three.)
A. Preferred
B. Assigned
C. Static
D. Custom
E. Dynamic
F. Auto
Answer: A, D, F
HP HP0-S32 examen certification HP0-S32 certification HP0-S32 HP0-S32 examen
NO.2 What is considered a Virtual Connect domain in Virtual Connect Enterprise Manager?
A. a maximum of 1,000 enclosures
B. a maximum of 16,000 servers
C. from 1 to 4 enclosures
D. 250 Virtual Connect Manager domains
Answer: C
certification HP certification HP0-S32 HP0-S32 HP0-S32 examen HP0-S32 HP0-S32
NO.3 How can a tagged packet be processed for QoS when it is received on an inbound interface? (Select
three.)
A. The marked priority level can be changed to enforce predetermined classification levels.
B. The packet can be scheduled for a queue based on the marked 802.1p priority level.
C. The packet can be moved to a more secure VLAN and its priority remarked.
D. The packet can be scheduled for a queue based on a preset policy.
E. The packet can be discarded or rerouted if it does not match a set policy.
F. The packet can be prevented switch traversal for a predetermined penalty period.
Answer: A, B, D
HP HP0-S32 examen HP0-S32 HP0-S32 HP0-S32 examen
NO.4 Which tasks are used to define a vNet for Virtual Connect Ethernet? (Select three.)
A. Assign only one network per server NIC.
B. Assign one or multiple networks per server NIC.
C. Optionally set the native VLAN.
D. Define the server profile.
E. Specify VLAN names/IDs.
F. Select unassigned uplinks.
Answer: A, D, F
certification HP certification HP0-S32 HP0-S32
NO.5 What are valid reasons for implementing VLANs? (Select two.)
A. to segregate traffic by resource or application needs
B. to provide enhanced name resolution
C. to reduce subnet cost options
D. to minimize the effect of broadcast traffic on hosts
E. to support multipathing
Answer: A, D
HP examen HP0-S32 examen HP0-S32
NO.6 What are Virtual Connect Enterprise Manager features? (Select three.)
A. is licensed per enclosure
B. is licensed with the Virtual Connect Ethernet module
C. is embedded on the Virtual Connect Ethernet module
D. can administer up to 256,000 network addresses
E. can manage a single domain of up to four enclosures
F. can administer up to 16,000 servers
Answer: A, D, F
HP HP0-S32 HP0-S32
NO.7 On a Cisco switch, what does the portfast setting do?
A. eliminates auto-negotiation delays with 10GbE ports
B. ensures the link is at maximum speed regardless of configuration
C. causes BPDUs to be blocked if sensed
D. eliminates delays inherent in RSTP/MSTP synchronization
Answer: D
HP certification HP0-S32 HP0-S32 certification HP0-S32
NO.8 What does N_Port ID virtualization do?
A. provides an abstraction layer between the server HBAs and the SAN
B. provides interoperability among third-party SAN device manufacturers
C. provides connectivity between the Virtual Connect module and the Onboard Administrator
D. enables a single HBA port to register multiple, unique WWNs within a fabric
Answer: D
HP HP0-S32 examen HP0-S32 HP0-S32
NO.9 Which statements are true about port VLAN memberships? (Select three.)
A. A port can be an untagged member of multiple VLANs.
B. A port must be a member of at least one VLAN.
C. A port must be a tagged member of only one VLAN.
D. A port can be an untagged member of only one VLAN.
E. A port can be a tagged member of multiple VLANs.
F. A port can be a tagged member of one VLAN and an untagged member of multiple VLANs.
Answer: B, D, E
HP HP0-S32 examen HP0-S32 HP0-S32
NO.10 What is considered a trunk in a Cisco switching environment?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: B
HP examen HP0-S32 examen certification HP0-S32 HP0-S32 certification HP0-S32 HP0-S32
NO.11 Which spanning tree protocol is the most appropriate in a VLAN-aware, non-proprietary network
implementation?
A. RSTP
B. PVST+
C. MSTP
D. STP
Answer: C
certification HP HP0-S32 examen HP0-S32 HP0-S32
NO.12 What is used to achieve Fibre Channel data transfer?
A. channel mesh
B. packets
C. tunnels
D. frames
Answer: D
certification HP certification HP0-S32 HP0-S32 examen HP0-S32 HP0-S32
NO.13 What does trunk refer to in industry-standard terminology?
A. aggregated switch links
B. tagged VLAN port (802.1Q)
C. tagged VLAN port plus link aggregation
D. Shared Uplink Set plus Connection Mode Auto
Answer: A
HP HP0-S32 HP0-S32 HP0-S32 HP0-S32 HP0-S32 examen
NO.14 What are the requirements for link aggregation using LACP? (Select three.)
A. Links must have the same tagged VLANs assigned.
B. Links must be the same speed.
C. Links must use the same media type.
D. Links must share a boundary.
E. Links must be full-duplex.
F. Links must be fiber connections.
Answer: B, D, E
certification HP HP0-S32 HP0-S32 examen HP0-S32 examen HP0-S32
NO.15 The IEEE 802.1AX (802.3ad) Link Aggregation Control Protocol is a Layer 2 protocol. What is its
function?
A. dynamically identifies link speeds regardless of media type
B. forms port trunks consisting of two or more uplink ports
C. identifies the VLAN to which frames transmitted on a link or port trunk belong
D. advertises information that describes and identifies devices
Answer: B
HP examen HP0-S32 certification HP0-S32 certification HP0-S32
NO.16 In a switching environment with redundant links, which technology is required for proper operation?
A. VLANs
B. Cisco vPC
C. loop prevention
D. dynamic routing
Answer: C
certification HP HP0-S32 examen certification HP0-S32 certification HP0-S32 HP0-S32
NO.17 You are configuring Virtual Connect Flex-10 10Gb Ethernet modules with Flex-10 server adapters.
What is an important network design consideration?
A. The Virtual Connect Flex-10 10Gb Ethernet module does not enforce VLAN isolation between
FlexNICs of the same server LAN on Motherboard (LOM).
B. If the Flex-10 server adapters are implemented as mezzanine cards, the Virtual Connect Flex-10 10Gb
Ethernet module requires all FlexNICs be configured for the same speed.
C. The Virtual Connect Manager will enforce physical port isolation by not allowing FlexNICs of the same
server port to connect to the same Virtual Connect network.
D. LACP trunking is not allowed between Virtual Connect uplink ports and infrastructure switch ports
located on different modules, even if within the same physical switch.
Answer: C
HP HP0-S32 certification HP0-S32
NO.18 Which industry-standard protocols are supported on Virtual Connect Ethernet uplinks? (Select three.)
A. IEEE 802.1 AX (802.3ad) Link Layer Discovery Protocol (LLDP)
B. IEEE 802.1w-2001 Rapid Spanning Tree (RSTP)
C. IEEE 802.1p Quality of Service (QoS)
D. IEEE 802.1 AX (802.3ad) Link Aggregation Protocol
E. IEEE 802.1Q VLAN tagging
F. IEEE 802.3af-2003 Power over Ethernet (PoE)
Answer: A, D, E
HP examen HP0-S32 examen HP0-S32 certification HP0-S32
NO.19 Which is a unique feature of a virtual switch?
A. port mirroring for packet analysis
B. VLAN segmentation at the port level
C. no packet forwarding (routing) between VLANs
D. maximum of 1016 ports per switch
Answer: D
HP HP0-S32 HP0-S32 examen
NO.20 Which port is the lowest-cost path to the spanning tree root bridge?
A. root port
B. defined root port
C. designated port
D. forwarding port
Answer: A
HP examen HP0-S32 certification HP0-S32 HP0-S32 HP0-S32 examen
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test HP HP0-S32 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
没有评论:
发表评论