L'avènement de la certification HP pratique d'examen HP0-Y36 HP0-Y12 HP2-Z06 questions et réponses

Si vous êtes intéressé par l'outil formation HP HP0-Y36 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Participer au test HP HP0-Y12 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat HP HP0-Y12 symbole bien la professionnalité d'un travailleur dans cette industrie.

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test HP HP2-Z06 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification HP HP2-Z06.

Le Certificat de HP HP0-Y36 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification HP HP0-Y36, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test HP0-Y36 sans aucun éffort, en même temps, le test de HP HP0-Y36 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test HP HP0-Y36 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Code d'Examen: HP0-Y36
Nom d'Examen: HP (Deploying HP Enterprise Networks)
Questions et réponses: 73 Q&As

Code d'Examen: HP0-Y12
Nom d'Examen: HP (Building ProCurve Resilient, Adaptive Networks)
Questions et réponses: 116 Q&As

Code d'Examen: HP2-Z06
Nom d'Examen: HP (HP ProCurve AIS 2010 Delta Exam)
Questions et réponses: 60 Q&As

HP0-Y36 est un test de HP Certification, donc réussir HP0-Y36 est le premier pas à mettre le pied sur la Certifiction HP. Ça peut expliquer certiainement pourquoi le test HP HP0-Y36 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test HP0-Y36. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

HP0-Y36 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y36.html

NO.1 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider has established only four Multi-Protocol BGP peers as shown in the exhibit. PE-4 has no
customer connections. Neither MPLS L3VPN is functional. Which configuration steps are required if this
topology is to be operational for both customers.? (Select two.)
A. Create VPN instances Customer A and Customer B on PE-4.
B. Configure PE-4 as a route-reflector within the bgp l3vpn-family.
C. Configure PE-4 as a route-reflector within the ipv4-family vpnv4.
D. Configure PE-4 as a route-reflector within the ipv4-family vpn-instance Cust-A and vpn-instance
Customer B.
E. Configure PE-4 as a bgp route-reflector.
F. Configure MBGP peers for P-10, P-20, and P-30.
Answer: A,C

HP examen   certification HP0-Y36   HP0-Y36 examen   certification HP0-Y36   HP0-Y36

NO.2 In the configuration of a Martini version L2VPN on two PE routers, which parameter must be identical?
A. S-VID
B. PW-ID
C. VLAN-ID
D. Service Instance number
E. VPN-Target
F. Remote LDP Peer IP address
Answer: B

HP examen   certification HP0-Y36   HP0-Y36 examen   certification HP0-Y36

NO.3 Which parameters must be configured on two PE routers to provision an Ethernet L2VPN in Martini
mode? (Select four.)
A. PW-ID
B. LDP Remote Peer
C. VPN Instance
D. Service Instance
E. S-VID
F. L2VPN Address Family
G. Route Distinguisher
H. IP Binding
Answer: A,B,D,E

HP examen   certification HP0-Y36   certification HP0-Y36   certification HP0-Y36

NO.4 Which technology in an MPLS L2VPN can provide ordered delivery of Ethernet frames?
A. TCP-based L2VPN
B. Control Word
C. Ethernet raw access circuit
D. VLAN pseudowire class
E. MPLS EXP bits
Answer: B

certification HP   HP0-Y36 examen   HP0-Y36 examen

NO.5 Click the Exhibit button.
Router-1 and Router-2 are BGP peers. Router-2 and Router-3 are BGP peers. However, Router-3 has not
learned the 16.0.0.0/8 BGP route. How can you resolve this issue? (Select two.)
A. Enable IGP synchronization on all routers.
B. Prepend AS1 to the 16.0.0.0/8 route on Router-1.
C. Enable BGP peering between Router-1 and Router-3.
D. Adjust the local preference of 16.0.0.0/8 on Router-1.
E. Configure Router-2 as a route reflector and Router-1 and Router-3 as clients.
F. Establish a physical link between Router-1 and Router-3.
Answer: C,E

HP examen   HP0-Y36 examen   HP0-Y36 examen   certification HP0-Y36   HP0-Y36 examen   HP0-Y36

NO.6 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. Customer A Site 1 successfully pings Customer A Site 2. This ICMP echo request is
captured on the Ethernet segment between routers P-10 and P-20. What is found on this packet capture?
(Select two.)
A. MPLS VPN label
B. VPN target
C. MPLS outer label corresponding to the LSR-ID of P-20
D. MPLS outer label corresponding to FEC 16.0.0.2
E. route distinguisher
Answer: A,D

HP examen   certification HP0-Y36   certification HP0-Y36

NO.7 Which characteristics of a Circuit Cross Connect (CCC) L2VPN distinguish it from the Martini or
Kompella versions? (Select two.)
A. It requires a stack of three MPLS labels.
B. It includes exactly two endpoints of the VPN.
C. It can operate with fewer than two MPLS labels.
D. It does not require any Label signaling.
Answer: C,D

HP examen   HP0-Y36 examen   HP0-Y36

NO.8 Click the Exhibit button.
A provider of MPLS services offers multiple types of MPLS-based VPNs to its customers. Provider Edge
router PE-1 directly connects to the following three customers:
What is the minimum number of LDP peers established on Router PE-1?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: B

HP examen   certification HP0-Y36   certification HP0-Y36   HP0-Y36 examen

Guide de formation plus récente de HP HP0-Y12

Le test certification HP HP0-Y12 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat HP HP0-Y12 puisse augmenter la compétition dans ce marché.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test HP HP0-Y12 à se preuver. Mais le taux du succès et bien bas. Participer le test HP HP0-Y12 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test HP HP0-Y12 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

Code d'Examen: HP0-Y12
Nom d'Examen: HP (Building ProCurve Resilient, Adaptive Networks)
Questions et réponses: 116 Q&As

Choisir le Pass4Test peut vous aider à réussir 100% le test HP HP0-Y12 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

HP0-Y12 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y12.html

NO.1 What is an advantage of locating routing intelligence at the edge of an enterprise network instead of in
the core?
A. The edge-oriented strategy requires fewer VLANs and networks.
B. The edge-oriented strategy supports VRRP and other protocols for default gateway redundancy.
C. The edge-oriented strategy enables ACLs and other traffic filters to be applied before traffic traverses
any part of the network.
D. The edge-oriented strategy simplifies summarization because each router must support VLANs only
for directly connected users.
Answer: C

HP   HP0-Y12 examen   certification HP0-Y12   HP0-Y12

NO.2 While analyzing network traffic, you notice that many packets have an 802.1p value of 0. On a
ProCurve switch with default QoS settings, what does this indicate?
A. No prioritization settings are in effect on the network.
B. The traffic will be mapped to the normal priority queue.
C. The network relies on Layer 3 classification technologies
D. The network is not using the default settings on ProCurve switches.
Answer: B

HP examen   HP0-Y12 examen   HP0-Y12   certification HP0-Y12   HP0-Y12

NO.3 You enter the following command at the CLI of a ProCurve Switch 3500yl:
3500.l(config)#ip route 22.0.0.0/8 172.16.100.100
However, when you enter show ip route to confirm your entry, no route to 22.0.0.0/8 appears in the route
table. Which
statement explains this condition?
A. The interface connected to 172.16.100.100 is down.
B. The switch has learned another route to 22.0.0.0/8 through OSPF.
C. The route table already includes a default route using 172.16.100.100.
D. The switch has not been configured with an IP address of 172.16.100.100.
Answer:A

HP examen   certification HP0-Y12   HP0-Y12   certification HP0-Y12   HP0-Y12 examen

NO.4 By default, what type of route is redistributed in RIP updates by ProCurve ProVision ASIC switches?
A. static
B. default
C. OSPF
D. connected
Answer: D

HP   HP0-Y12   HP0-Y12   certification HP0-Y12

NO.5 You will connect an IP telephone that supports LLDP-MED to port 8 on a ProCurve Switch 3500yl.
Which configuration step will enable the switch to auto-configure the appropriate VLAN for the phone??
A. Enable LLDP-MED in the VLAN 1 configuration context.
B. Configure port 8 as a tagged member of a voice VLAN.
C. Enable LLDP-MED in the configuration context for a voice VLAN.
D. Define port 8 as an LLDP-MED port in the global configuration context.
Answer: B

HP examen   HP0-Y12   HP0-Y12   HP0-Y12   HP0-Y12 examen   HP0-Y12 examen

NO.6 Which condition is necessary to enable a group of networks to be auto-summarized by a ProCurve
Switch 3500yl?
A. The address ranges to be summarized must be within different OSPF areas.
B. The address ranges to be summarized must be within a classful network boundary.
C. The address ranges to be summarized must be directly connected to a neighbor router.
D. The address ranges to be summarized must be accessible through a neighbor router interface.
Answer: B

certification HP   HP0-Y12   HP0-Y12

NO.7 What is a difference between voice traffic and video traffic?
A. Voice traffic is typically more difficult to route than streaming video traffic.
B. Voice traffic is typically more sensitive to delay than streaming video traffic.
C. Voice traffic is typically less sensitive to jitter than streaming video traffic.
D. Voice traffic is typically more bandwidth-intensive than streaming video traffic.
Answer: B

HP examen   HP0-Y12   HP0-Y12 examen   HP0-Y12 examen   HP0-Y12

NO.8 What is the difference between administrative distance and cost?
A. Administrative distance is applied only to routes learned through OSPF. Cost applies to RIP routes as
well as OSPF routes.
B. Administrative distance indicates the distance to remote networks learned through routing protocols.
Cost applies static routes and directly connected networks.
C. Administrative distance is determined solely through interactions among routers that share a routing
protocol. Cost can be defined by the administrator of each router.
D. Administrative distance is a locally significant value that can be used to break ties between routes
learned from different sources. Cost is a cumulative metric that indicates the number of hops to a remote
network.
Answer: D

HP examen   HP0-Y12   certification HP0-Y12   certification HP0-Y12   HP0-Y12 examen   HP0-Y12

NO.9 When does a router use administrative distance to determine which route to include in its route table?
A. when the router learned about multiple routes with equal-cost paths to the same destination
B. when the router learned about multiple routes to the same destination from different sources using the
same routing protocol
C. when the router learned about multiple routes to the same destination from different routing protocols
or static configuration
D. when the router is configured with static routes to the same destination that specify the same cost but
different next hop router interfaces
Answer: C

HP examen   HP0-Y12   HP0-Y12   HP0-Y12 examen   certification HP0-Y12

NO.10 What is the role of an OSPF Area Border Router?
A. to connect multiple non-backbone areas
B. to connect a backbone area to non-backbone areas
C. to connect OSPF domains with domains that use other routing protocols
D. to connect a backbone area to the backbones of other OSPF routing domains
Answer: B

HP   certification HP0-Y12   certification HP0-Y12

NO.11 When does an LLDP-enabled switch start sending LLDP advertisements?
A. when QoS is enabled
B. when IP multicast is enabled
C. immediately after it has started
D. when it receives an LLDP request from a neighbor
Answer: C

HP   HP0-Y12   HP0-Y12 examen

NO.12 What are the advantages of implementing IP routing technologies at the network edge? (Select two.)
A. provide per-user QoS
B. decrease the load on network core
C. eliminate the need for routing protocols
D. create smaller, localized broadcast domains
E. enhance support for default gateway redundancy
Answer: BD

HP   HP0-Y12 examen   HP0-Y12 examen   HP0-Y12

NO.13 Why does network congestion often cause more network congestion?
A. RSVP routers allocate more bandwidth to UDP applications.
B. TCP applications request retransmission of dropped packets.
C. QoS settings require switches to retransmit all real-time traffic.
D. 802.1p priorities are ignored after congestion reaches a user-defined threshold.
Answer: B

certification HP   HP0-Y12 examen   certification HP0-Y12   HP0-Y12

NO.14 You must configure QoS on a ProCurve Switch 8212zl in the core layer of a network. One interface on
the switch receives traffic that uses only Layer 3 markers to indicate priority. What must you do to enable
the switch to forward this traffic with correct priority?
A. Set the QoS trust level to the appropriate value.
B. Enable the appropriate interpretation of the IP ToS field.
C. Configure port-based priorities for all ports forwarding this traffic.
D. Configure custom IEEE 802.1p maps for all ports forwarding this traffic.
Answer: B

HP   HP0-Y12   certification HP0-Y12   HP0-Y12   HP0-Y12

NO.15 How many priority levels are specified by the IEEE 802.1p standard?
A. 4
B. 7
C. 8 D. 16
Answer: C

HP   HP0-Y12   HP0-Y12   HP0-Y12

NO.16 What is the effect when the following command is entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-111)#qos priority 2
A. Packets entering the switch through VLAN 111 will be forwarded with normal priority.
B. Packets entering the switch through VLAN 111 will be forwarded with lower than normal priority.
C. Packets entering the switch through VLAN 111 will be forwarded with higher than normal priority.
D. Packets entering the switch through VLAN 111 will retain the priority marker set by another device.
Answer: B

HP   certification HP0-Y12   HP0-Y12

NO.17 Under what condition does the IEEE 802.1p field provide end-to-end prioritization?
A. All switches can classify traffic based on DSCP.
B. Source and destination hosts are in the same VLAN.
C. The network is experiencing high levels of congestion.
D. All links in the path between source and destination are tagged.
Answer: D

certification HP   HP0-Y12   HP0-Y12 examen

NO.18 You must design an IP addressing scheme for a network that must support 16 different types of users,
each with
different resource and security requirements. What is an advantage of ensuring that the number of
networks assigned to
each type of user is a power of 2?
A. It enables automatic summarization at classful boundaries.
B. It minimizes the number of VLANs required to support each type of user.
C. It ensures that an adequate number of IP addresses will be available for each type of user.
D. It simplifies summarization because all networks for each type of user can be summarized in a single
routing statement.
Answer: D

HP examen   HP0-Y12   HP0-Y12 examen   HP0-Y12 examen   certification HP0-Y12

NO.19 While analyzing network traffic using a port monitor on a ProCurve Switch 8212zl, you notice that
many packets have an 802.1p value of 1. If the switch has default QoS settings, what does this indicate?
A. The 8212zl has marked the traffic for low-priority forwarding.
B. The 8212zl has marked the traffic for high-priority forwarding.
C. Another device has marked the traffic for low-priority forwarding.
D. Another device has marked the traffic for high-priority forwarding.
Answer: C

HP   HP0-Y12   HP0-Y12   HP0-Y12   HP0-Y12 examen

NO.20 You must determine if the default settings on ProCurve 5406zl switches will provide adequate QoS for
a multimedia training application. What must you learn about the application in order to make this
determination?
A. if it recognizes IGMP joins from receivers
B. if it uses TCP or UDP as a transport protocol
C. if it inserts Layer 2 or Layer 3 priority markers
D. if it supports Guaranteed Minimum Bandwidth
Answer: C

HP   HP0-Y12   HP0-Y12   HP0-Y12

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test HP HP0-Y12. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Certification HP de téléchargement gratuit pratique d'examen HP0-Y12, questions et réponses

La partie plus nouvelle de test Certification HP HP0-Y12 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel HP HP0-Y12. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

Passer le test HP HP0-Y12, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification HP HP0-Y12. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification HP HP0-Y12.

Code d'Examen: HP0-Y12
Nom d'Examen: HP (Building ProCurve Resilient, Adaptive Networks)
Questions et réponses: 116 Q&As

Pass4Test est un bon site d'offrir la facilité aux candidats de test HP HP0-Y12. Selon les anciens test, l'outil de formation HP HP0-Y12 est bien proche de test réel.

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test HP HP0-Y12 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test HP HP0-Y12 à la première fois.

On peut voir que beaucoup de candidats ratent le test HP HP0-Y12 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test HP HP0-Y12 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test HP HP0-Y12, Pass4Test peut offrir les Q&As des autres test Certification IT.

HP0-Y12 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y12.html

NO.1 Under what condition does the IEEE 802.1p field provide end-to-end prioritization?
A. All switches can classify traffic based on DSCP.
B. Source and destination hosts are in the same VLAN.
C. The network is experiencing high levels of congestion.
D. All links in the path between source and destination are tagged.
Answer: D

certification HP   HP0-Y12 examen   HP0-Y12 examen   certification HP0-Y12   HP0-Y12 examen   certification HP0-Y12

NO.2 By default, what type of route is redistributed in RIP updates by ProCurve ProVision ASIC switches?
A. static
B. default
C. OSPF
D. connected
Answer: D

HP   HP0-Y12 examen   HP0-Y12   certification HP0-Y12   HP0-Y12

NO.3 What is the role of an OSPF Area Border Router?
A. to connect multiple non-backbone areas
B. to connect a backbone area to non-backbone areas
C. to connect OSPF domains with domains that use other routing protocols
D. to connect a backbone area to the backbones of other OSPF routing domains
Answer: B

HP examen   HP0-Y12 examen   HP0-Y12   HP0-Y12   HP0-Y12

NO.4 When does an LLDP-enabled switch start sending LLDP advertisements?
A. when QoS is enabled
B. when IP multicast is enabled
C. immediately after it has started
D. when it receives an LLDP request from a neighbor
Answer: C

HP   HP0-Y12   HP0-Y12 examen   certification HP0-Y12   certification HP0-Y12

NO.5 What is an advantage of locating routing intelligence at the edge of an enterprise network instead of in
the core?
A. The edge-oriented strategy requires fewer VLANs and networks.
B. The edge-oriented strategy supports VRRP and other protocols for default gateway redundancy.
C. The edge-oriented strategy enables ACLs and other traffic filters to be applied before traffic traverses
any part of the network.
D. The edge-oriented strategy simplifies summarization because each router must support VLANs only
for directly connected users.
Answer: C

HP   HP0-Y12 examen   HP0-Y12   HP0-Y12 examen   HP0-Y12

NO.6 You must determine if the default settings on ProCurve 5406zl switches will provide adequate QoS for
a multimedia training application. What must you learn about the application in order to make this
determination?
A. if it recognizes IGMP joins from receivers
B. if it uses TCP or UDP as a transport protocol
C. if it inserts Layer 2 or Layer 3 priority markers
D. if it supports Guaranteed Minimum Bandwidth
Answer: C

HP examen   HP0-Y12   certification HP0-Y12   certification HP0-Y12

NO.7 What is the difference between administrative distance and cost?
A. Administrative distance is applied only to routes learned through OSPF. Cost applies to RIP routes as
well as OSPF routes.
B. Administrative distance indicates the distance to remote networks learned through routing protocols.
Cost applies static routes and directly connected networks.
C. Administrative distance is determined solely through interactions among routers that share a routing
protocol. Cost can be defined by the administrator of each router.
D. Administrative distance is a locally significant value that can be used to break ties between routes
learned from different sources. Cost is a cumulative metric that indicates the number of hops to a remote
network.
Answer: D

certification HP   HP0-Y12 examen   HP0-Y12 examen

NO.8 While analyzing network traffic, you notice that many packets have an 802.1p value of 0. On a
ProCurve switch with default QoS settings, what does this indicate?
A. No prioritization settings are in effect on the network.
B. The traffic will be mapped to the normal priority queue.
C. The network relies on Layer 3 classification technologies
D. The network is not using the default settings on ProCurve switches.
Answer: B

HP   certification HP0-Y12   HP0-Y12

NO.9 You must configure QoS on a ProCurve Switch 8212zl in the core layer of a network. One interface on
the switch receives traffic that uses only Layer 3 markers to indicate priority. What must you do to enable
the switch to forward this traffic with correct priority?
A. Set the QoS trust level to the appropriate value.
B. Enable the appropriate interpretation of the IP ToS field.
C. Configure port-based priorities for all ports forwarding this traffic.
D. Configure custom IEEE 802.1p maps for all ports forwarding this traffic.
Answer: B

HP   certification HP0-Y12   HP0-Y12   certification HP0-Y12   certification HP0-Y12

NO.10 What are the advantages of implementing IP routing technologies at the network edge? (Select two.)
A. provide per-user QoS
B. decrease the load on network core
C. eliminate the need for routing protocols
D. create smaller, localized broadcast domains
E. enhance support for default gateway redundancy
Answer: BD

HP   HP0-Y12 examen   HP0-Y12   HP0-Y12

NO.11 What is a difference between voice traffic and video traffic?
A. Voice traffic is typically more difficult to route than streaming video traffic.
B. Voice traffic is typically more sensitive to delay than streaming video traffic.
C. Voice traffic is typically less sensitive to jitter than streaming video traffic.
D. Voice traffic is typically more bandwidth-intensive than streaming video traffic.
Answer: B

HP   HP0-Y12   HP0-Y12   certification HP0-Y12   HP0-Y12

NO.12 What is the effect when the following command is entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-111)#qos priority 2
A. Packets entering the switch through VLAN 111 will be forwarded with normal priority.
B. Packets entering the switch through VLAN 111 will be forwarded with lower than normal priority.
C. Packets entering the switch through VLAN 111 will be forwarded with higher than normal priority.
D. Packets entering the switch through VLAN 111 will retain the priority marker set by another device.
Answer: B

HP   HP0-Y12   certification HP0-Y12

NO.13 You enter the following command at the CLI of a ProCurve Switch 3500yl:
3500.l(config)#ip route 22.0.0.0/8 172.16.100.100
However, when you enter show ip route to confirm your entry, no route to 22.0.0.0/8 appears in the route
table. Which
statement explains this condition?
A. The interface connected to 172.16.100.100 is down.
B. The switch has learned another route to 22.0.0.0/8 through OSPF.
C. The route table already includes a default route using 172.16.100.100.
D. The switch has not been configured with an IP address of 172.16.100.100.
Answer:A

HP   HP0-Y12 examen   HP0-Y12   certification HP0-Y12

NO.14 You will connect an IP telephone that supports LLDP-MED to port 8 on a ProCurve Switch 3500yl.
Which configuration step will enable the switch to auto-configure the appropriate VLAN for the phone??
A. Enable LLDP-MED in the VLAN 1 configuration context.
B. Configure port 8 as a tagged member of a voice VLAN.
C. Enable LLDP-MED in the configuration context for a voice VLAN.
D. Define port 8 as an LLDP-MED port in the global configuration context.
Answer: B

HP   HP0-Y12   HP0-Y12   HP0-Y12 examen   HP0-Y12

NO.15 You must design an IP addressing scheme for a network that must support 16 different types of users,
each with
different resource and security requirements. What is an advantage of ensuring that the number of
networks assigned to
each type of user is a power of 2?
A. It enables automatic summarization at classful boundaries.
B. It minimizes the number of VLANs required to support each type of user.
C. It ensures that an adequate number of IP addresses will be available for each type of user.
D. It simplifies summarization because all networks for each type of user can be summarized in a single
routing statement.
Answer: D

HP examen   HP0-Y12   HP0-Y12   HP0-Y12

NO.16 How many priority levels are specified by the IEEE 802.1p standard?
A. 4
B. 7
C. 8 D. 16
Answer: C

HP   HP0-Y12   HP0-Y12

NO.17 Why does network congestion often cause more network congestion?
A. RSVP routers allocate more bandwidth to UDP applications.
B. TCP applications request retransmission of dropped packets.
C. QoS settings require switches to retransmit all real-time traffic.
D. 802.1p priorities are ignored after congestion reaches a user-defined threshold.
Answer: B

HP   HP0-Y12   certification HP0-Y12   HP0-Y12

NO.18 When does a router use administrative distance to determine which route to include in its route table?
A. when the router learned about multiple routes with equal-cost paths to the same destination
B. when the router learned about multiple routes to the same destination from different sources using the
same routing protocol
C. when the router learned about multiple routes to the same destination from different routing protocols
or static configuration
D. when the router is configured with static routes to the same destination that specify the same cost but
different next hop router interfaces
Answer: C

HP   HP0-Y12 examen   HP0-Y12 examen   HP0-Y12   certification HP0-Y12   HP0-Y12 examen

NO.19 Which condition is necessary to enable a group of networks to be auto-summarized by a ProCurve
Switch 3500yl?
A. The address ranges to be summarized must be within different OSPF areas.
B. The address ranges to be summarized must be within a classful network boundary.
C. The address ranges to be summarized must be directly connected to a neighbor router.
D. The address ranges to be summarized must be accessible through a neighbor router interface.
Answer: B

HP examen   HP0-Y12 examen   HP0-Y12   certification HP0-Y12   HP0-Y12 examen

NO.20 While analyzing network traffic using a port monitor on a ProCurve Switch 8212zl, you notice that
many packets have an 802.1p value of 1. If the switch has default QoS settings, what does this indicate?
A. The 8212zl has marked the traffic for low-priority forwarding.
B. The 8212zl has marked the traffic for high-priority forwarding.
C. Another device has marked the traffic for low-priority forwarding.
D. Another device has marked the traffic for high-priority forwarding.
Answer: C

HP   HP0-Y12 examen   HP0-Y12

Est-que vous s'inquiétez encore à passer le test Certification HP0-Y12 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de HP HP0-Y12? Si vous voulez réussir le test HP HP0-Y12 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Les meilleures HP HP0-Y12 examen pratique questions et réponses

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test HP HP0-Y12. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test HP HP0-Y12 à se preuver. Mais le taux du succès et bien bas. Participer le test HP HP0-Y12 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

En quelques années, le test de certification de HP HP0-Y12 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de HP HP0-Y12? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification HP0-Y12. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification HP0-Y12, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Code d'Examen: HP0-Y12
Nom d'Examen: HP (Building ProCurve Resilient, Adaptive Networks)
Questions et réponses: 116 Q&As

Si vous traviallez dur encore pour préparer le test de HP HP0-Y12 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test HP HP0-Y12.

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification HP HP0-Y12, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test HP HP0-Y12 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Certification HP HP0-Y12 est un des tests plus importants dans le système de Certification HP. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test HP HP0-Y12 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

HP0-Y12 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y12.html

NO.1 When does an LLDP-enabled switch start sending LLDP advertisements?
A. when QoS is enabled
B. when IP multicast is enabled
C. immediately after it has started
D. when it receives an LLDP request from a neighbor
Answer: C

HP   HP0-Y12   HP0-Y12 examen   HP0-Y12 examen   certification HP0-Y12

NO.2 What is the role of an OSPF Area Border Router?
A. to connect multiple non-backbone areas
B. to connect a backbone area to non-backbone areas
C. to connect OSPF domains with domains that use other routing protocols
D. to connect a backbone area to the backbones of other OSPF routing domains
Answer: B

HP   HP0-Y12   HP0-Y12   HP0-Y12 examen

NO.3 While analyzing network traffic using a port monitor on a ProCurve Switch 8212zl, you notice that
many packets have an 802.1p value of 1. If the switch has default QoS settings, what does this indicate?
A. The 8212zl has marked the traffic for low-priority forwarding.
B. The 8212zl has marked the traffic for high-priority forwarding.
C. Another device has marked the traffic for low-priority forwarding.
D. Another device has marked the traffic for high-priority forwarding.
Answer: C

HP   HP0-Y12 examen   HP0-Y12   HP0-Y12 examen   HP0-Y12 examen

NO.4 What is a difference between voice traffic and video traffic?
A. Voice traffic is typically more difficult to route than streaming video traffic.
B. Voice traffic is typically more sensitive to delay than streaming video traffic.
C. Voice traffic is typically less sensitive to jitter than streaming video traffic.
D. Voice traffic is typically more bandwidth-intensive than streaming video traffic.
Answer: B

HP   certification HP0-Y12   certification HP0-Y12   HP0-Y12   HP0-Y12

NO.5 You must configure QoS on a ProCurve Switch 8212zl in the core layer of a network. One interface on
the switch receives traffic that uses only Layer 3 markers to indicate priority. What must you do to enable
the switch to forward this traffic with correct priority?
A. Set the QoS trust level to the appropriate value.
B. Enable the appropriate interpretation of the IP ToS field.
C. Configure port-based priorities for all ports forwarding this traffic.
D. Configure custom IEEE 802.1p maps for all ports forwarding this traffic.
Answer: B

certification HP   HP0-Y12   certification HP0-Y12   HP0-Y12   certification HP0-Y12

NO.6 When does a router use administrative distance to determine which route to include in its route table?
A. when the router learned about multiple routes with equal-cost paths to the same destination
B. when the router learned about multiple routes to the same destination from different sources using the
same routing protocol
C. when the router learned about multiple routes to the same destination from different routing protocols
or static configuration
D. when the router is configured with static routes to the same destination that specify the same cost but
different next hop router interfaces
Answer: C

HP examen   HP0-Y12   HP0-Y12

NO.7 You will connect an IP telephone that supports LLDP-MED to port 8 on a ProCurve Switch 3500yl.
Which configuration step will enable the switch to auto-configure the appropriate VLAN for the phone??
A. Enable LLDP-MED in the VLAN 1 configuration context.
B. Configure port 8 as a tagged member of a voice VLAN.
C. Enable LLDP-MED in the configuration context for a voice VLAN.
D. Define port 8 as an LLDP-MED port in the global configuration context.
Answer: B

HP examen   HP0-Y12   certification HP0-Y12   HP0-Y12

NO.8 Why does network congestion often cause more network congestion?
A. RSVP routers allocate more bandwidth to UDP applications.
B. TCP applications request retransmission of dropped packets.
C. QoS settings require switches to retransmit all real-time traffic.
D. 802.1p priorities are ignored after congestion reaches a user-defined threshold.
Answer: B

certification HP   HP0-Y12   HP0-Y12

NO.9 By default, what type of route is redistributed in RIP updates by ProCurve ProVision ASIC switches?
A. static
B. default
C. OSPF
D. connected
Answer: D

certification HP   HP0-Y12 examen   HP0-Y12   HP0-Y12   HP0-Y12

NO.10 How many priority levels are specified by the IEEE 802.1p standard?
A. 4
B. 7
C. 8 D. 16
Answer: C

certification HP   HP0-Y12   HP0-Y12   HP0-Y12   HP0-Y12 examen

NO.11 What is the difference between administrative distance and cost?
A. Administrative distance is applied only to routes learned through OSPF. Cost applies to RIP routes as
well as OSPF routes.
B. Administrative distance indicates the distance to remote networks learned through routing protocols.
Cost applies static routes and directly connected networks.
C. Administrative distance is determined solely through interactions among routers that share a routing
protocol. Cost can be defined by the administrator of each router.
D. Administrative distance is a locally significant value that can be used to break ties between routes
learned from different sources. Cost is a cumulative metric that indicates the number of hops to a remote
network.
Answer: D

HP   certification HP0-Y12   HP0-Y12 examen   HP0-Y12 examen   HP0-Y12

NO.12 Which condition is necessary to enable a group of networks to be auto-summarized by a ProCurve
Switch 3500yl?
A. The address ranges to be summarized must be within different OSPF areas.
B. The address ranges to be summarized must be within a classful network boundary.
C. The address ranges to be summarized must be directly connected to a neighbor router.
D. The address ranges to be summarized must be accessible through a neighbor router interface.
Answer: B

HP   HP0-Y12 examen   HP0-Y12   HP0-Y12

NO.13 What are the advantages of implementing IP routing technologies at the network edge? (Select two.)
A. provide per-user QoS
B. decrease the load on network core
C. eliminate the need for routing protocols
D. create smaller, localized broadcast domains
E. enhance support for default gateway redundancy
Answer: BD

HP   certification HP0-Y12   HP0-Y12   HP0-Y12   HP0-Y12 examen

NO.14 You must design an IP addressing scheme for a network that must support 16 different types of users,
each with
different resource and security requirements. What is an advantage of ensuring that the number of
networks assigned to
each type of user is a power of 2?
A. It enables automatic summarization at classful boundaries.
B. It minimizes the number of VLANs required to support each type of user.
C. It ensures that an adequate number of IP addresses will be available for each type of user.
D. It simplifies summarization because all networks for each type of user can be summarized in a single
routing statement.
Answer: D

HP   HP0-Y12   HP0-Y12   certification HP0-Y12

NO.15 Under what condition does the IEEE 802.1p field provide end-to-end prioritization?
A. All switches can classify traffic based on DSCP.
B. Source and destination hosts are in the same VLAN.
C. The network is experiencing high levels of congestion.
D. All links in the path between source and destination are tagged.
Answer: D

HP examen   certification HP0-Y12   HP0-Y12

NO.16 While analyzing network traffic, you notice that many packets have an 802.1p value of 0. On a
ProCurve switch with default QoS settings, what does this indicate?
A. No prioritization settings are in effect on the network.
B. The traffic will be mapped to the normal priority queue.
C. The network relies on Layer 3 classification technologies
D. The network is not using the default settings on ProCurve switches.
Answer: B

HP   HP0-Y12   HP0-Y12 examen   HP0-Y12   HP0-Y12 examen

NO.17 What is an advantage of locating routing intelligence at the edge of an enterprise network instead of in
the core?
A. The edge-oriented strategy requires fewer VLANs and networks.
B. The edge-oriented strategy supports VRRP and other protocols for default gateway redundancy.
C. The edge-oriented strategy enables ACLs and other traffic filters to be applied before traffic traverses
any part of the network.
D. The edge-oriented strategy simplifies summarization because each router must support VLANs only
for directly connected users.
Answer: C

certification HP   HP0-Y12 examen   HP0-Y12 examen   HP0-Y12

NO.18 What is the effect when the following command is entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-111)#qos priority 2
A. Packets entering the switch through VLAN 111 will be forwarded with normal priority.
B. Packets entering the switch through VLAN 111 will be forwarded with lower than normal priority.
C. Packets entering the switch through VLAN 111 will be forwarded with higher than normal priority.
D. Packets entering the switch through VLAN 111 will retain the priority marker set by another device.
Answer: B

HP   certification HP0-Y12   certification HP0-Y12   HP0-Y12   certification HP0-Y12

NO.19 You enter the following command at the CLI of a ProCurve Switch 3500yl:
3500.l(config)#ip route 22.0.0.0/8 172.16.100.100
However, when you enter show ip route to confirm your entry, no route to 22.0.0.0/8 appears in the route
table. Which
statement explains this condition?
A. The interface connected to 172.16.100.100 is down.
B. The switch has learned another route to 22.0.0.0/8 through OSPF.
C. The route table already includes a default route using 172.16.100.100.
D. The switch has not been configured with an IP address of 172.16.100.100.
Answer:A

HP examen   certification HP0-Y12   HP0-Y12   certification HP0-Y12   HP0-Y12 examen

NO.20 You must determine if the default settings on ProCurve 5406zl switches will provide adequate QoS for
a multimedia training application. What must you learn about the application in order to make this
determination?
A. if it recognizes IGMP joins from receivers
B. if it uses TCP or UDP as a transport protocol
C. if it inserts Layer 2 or Layer 3 priority markers
D. if it supports Guaranteed Minimum Bandwidth
Answer: C

HP   HP0-Y12   HP0-Y12   HP0-Y12   certification HP0-Y12

Vous pouvez télécharger tout d'abord une partie de Q&A Certification HP HP0-Y12 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test HP HP0-Y12. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.