Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Alcatel-Lucent 4A0-107. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Alcatel-Lucent 4A0-107, et aussi une meilleure assurance du succès du test 4A0-107. Vous choisissez Pass4Test, vous choisissez le succès.
Code d'Examen: 4A0-107
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Quality of Service)
Questions et réponses: 100 Q&As
Pass4Test vous promet de vous aider à passer le test Alcatel-Lucent 4A0-107, vous pouvez télécharger maintenant les Q&As partielles de test Alcatel-Lucent 4A0-107 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Alcatel-Lucent 4A0-107 dans Pass4Test pour se former avant le test Alcatel-Lucent 4A0-107.
Le test Alcatel-Lucent 4A0-107 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Alcatel-Lucent 4A0-107 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Alcatel-Lucent 4A0-107. Ajoutez la Q&A au panier.
4A0-107 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-107.html
NO.1 What is the maximum number of SAP-ingress policies that can be applied on a SAP?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 8
Answer: A
Alcatel-Lucent 4A0-107 examen certification 4A0-107 certification 4A0-107 4A0-107
NO.2 Which of the following statements regarding DSCP bits are TRUE? (Choose three)
A. The three most significant (first) bits define 8 forwarding classes.
B. The three least significant (last) bits of the DSCP specify the drop probability.
C. The full 8 bits of the TOS field are used for DSCP.
D. To convert DSCP to IP precedence, the three most significant (first) bits are matched.
E. DSCP provides for eight drop probabilities.
Answer: A,B,D
Alcatel-Lucent examen certification 4A0-107 certification 4A0-107 4A0-107 examen
NO.3 Which of the following are examples of metrics for QoS.?
A. Signal degradation, attenuation, line loss
B. Latency, FIFO, WRED
C. Delay, jitter, packet loss
D. SNR, queue depth, latency
E. Attenuation, dispersion, latency
Answer: C
Alcatel-Lucent 4A0-107 4A0-107 4A0-107
NO.4 Which of the following are possible criteria for classifying packets at the network port ingress on the
Alcatel-Lucent 7750 SR? (Choose three)
A. The EXP bits in the MPLS header.
B. The packet's source and destination IP addresses.
C. The packet's DSCP bits.
D. The dot1p bits in the frame header.
E. The ID of an SDP that is transporting the packet.
Answer: A,C,D
Alcatel-Lucent examen 4A0-107 examen certification 4A0-107 certification 4A0-107 4A0-107
NO.5 Individual application streams are considered microflows, whereas __________ are considered
macroflows.
A. SAPs
B. SDPs
C. Services
D. Queues
E. Schedulers
F. Forwarding classes
Answer: F
Alcatel-Lucent 4A0-107 4A0-107 4A0-107 examen 4A0-107
NO.6 What is the 6-bit binary representation of DSCP value AF21?
A. 010011
B. 100010
C. 010001
D. 001100
E. 010010
Answer: E
Alcatel-Lucent 4A0-107 4A0-107 4A0-107 examen 4A0-107 examen
NO.7 How many bits does DSCP use to provide QoS marking options?
A. 8
B. 16
C. 6
D. 4
E. 3
Answer: C
certification Alcatel-Lucent 4A0-107 examen 4A0-107 examen 4A0-107 examen 4A0-107
NO.8 Which of the following are characteristics of DSCP? (Choose two)
A. DSCP is part of the Layer 3 header.
B. DSCP is a 6-bit field.
C. DSCP specifies eight different priorities.
D. DSCP specifies four precedence levels.
E. DSCP is part of the Layer 2 header
F. DSCP specifies 128 different per-hop behaviors.
Answer: A,B
Alcatel-Lucent examen certification 4A0-107 4A0-107 4A0-107 examen 4A0-107
NO.9 Which of the following BEST describes a SAP when regarding QoS?
A. A point in the network where EXP bits can be mapped to one of eight predefined FCs, each one with its
own queue.
B. A logical point in a service tunnel where all of customer traffic is aggregated.
C. A point at which the initial classification of customer traffic occurs.
D. A point in the network where QoS parameters are discarded in favor of lower-level hardware queuing
functions, such as LLI (Link Layer Interleave).
E. A point in the network where traffic flows from multiple different services are queued together, based on
forwarding class.
Answer: C
Alcatel-Lucent examen 4A0-107 4A0-107 4A0-107 4A0-107
NO.10 Click the exhibit button below.
Based on the configuration shown below, name the forwarding class to be associated with a TCP packet
encapsulated inside an Ethernet frame that arrives on SAP 1/1/5 with the following characteristics:
Destination IP address = 120.110.1.1
TCP port number = 23
DSCP value = nc1
Dot1pvalue = 3
A. H2
B. NC
C. L2
D. EF
E. H1
F. BE
Answer: C
Alcatel-Lucent certification 4A0-107 4A0-107 examen 4A0-107
NO.11 Which of the following can be used as classifiers of customer traffic? (Choose three)
A. DSCP value
B. 802.1p value
C. IP DF bit
D. TCP/UDP port numbers
E. HTML version number
Answer: A,B,D
Alcatel-Lucent 4A0-107 4A0-107 examen certification 4A0-107
NO.12 What is an SLA? (Choose two)
A. An SLA is used to provide automated, real-time testing and alarming for throughput, latency, and jitter
across a provider's network.
B. An SLA is an agreement between a customer and a provider that dictates the treatment of customer
traffic across the provider's network.
C. An SLA allows customers to control all traffic within the service provider's network by prioritizing their
traffic over others as desired.
D. An SLA allows a customer to pre-mark traffic and ensure that traffic is treated as per the agreement
within the provider's network.
E. An SLA is a standard set of network QoS policies that a provider shares to all its customers, allowing
them to better understand the treatment of traffic within the provider's network.
Answer: B,D
Alcatel-Lucent 4A0-107 examen certification 4A0-107 certification 4A0-107 4A0-107 examen
NO.13 The IP ToS field consists of ________ bits, of which ________are used. The _________most significant
(first) bits define precedence.
A. 8, 6, 3
B. 8, 8, 6
C. 16, 8, 4
D. 8, 6, 4
E. 24, 16, 8
Answer: A
Alcatel-Lucent certification 4A0-107 4A0-107
NO.14 Which of the following are characteristics of 802.1p? (Choose two)
A. 802.1p adds 16 bits to the Layer 2 header,
B. 802.1p adds 16 bits to the Layer 3 header.
C. 802.1p specifies 64 different priority levels.
D. 802.1p uses a field in the 802.1Q header.
E. 802.1p uses a field in the Layer 3 IP header
F. 802.1p defines a 3-bit Class of Service field.
Answer: D,F
Alcatel-Lucent certification 4A0-107 4A0-107 4A0-107 examen 4A0-107
NO.15 Which of the following are major components of QoS functionality on the Alcatel-Lucent 7750 SR?
(Choose three)
A. Microflow reservations using RSVP
B. DSCP to EXP translation
C. Traffic classification
D. Automatic profiling and policy configuration
E. Buffer memory management
F. Traffic scheduling
Answer: C,E,F
certification Alcatel-Lucent 4A0-107 examen 4A0-107 certification 4A0-107
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
没有评论:
发表评论