Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Network Appliance NS0-501 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Network Appliance NS0-501 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Network Appliance NS0-501.
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Network Appliance NS0-501. Il n'y a pas de soucis à réussir le test avec une haute note.
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Network Appliance NS0-501 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Vous aurez une assurance 100% à réussir le test Network Appliance NS0-501 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Choisir le Pass4Test peut vous aider à réussir 100% le test Network Appliance NS0-501 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Code d'Examen: NS0-501
Nom d'Examen: Network Appliance (Network Appliance Implementation Engineer-SAN)
Questions et réponses: 100 Q&As
NS0-501 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-501.html
NO.1 A company has deployed a NetApp dual controller FAS3100 series with iSCSI. Currently, there are five
Windows servers and three Novell NetWare servers connected to the IP SAN. The customer wants to
connect an HP-UX server to the IP SAN.
Which cfmode allows all operating systems to co-exist in the IP SAN?
A.single_image
B.standby
C.cfmode not applicable
D.dual_fabric
Answer:C
Network Appliance certification NS0-501 NS0-501
NO.2 A company has a Fibre Channel environment and wants to connect a new host in a remote data center
using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A.50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B.50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C.50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D.50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer:D
Network Appliance NS0-501 certification NS0-501 NS0-501
NO.3 Which command do you use to see the rate of change between two successive Snapshot copies in a
flexible volume in Data ONTAP?
A.snap diff
B.snap calculate
C.snap delta
D.snap space
Answer:C
certification Network Appliance NS0-501 certification NS0-501 NS0-501 NS0-501
NO.4 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A.EMutil
B.SANutil
C.hbainfo
D.SANsurfer
E.HBAnywhere
Answer:E
Network Appliance examen NS0-501 examen NS0-501
NO.5 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A.point-to-point
B.switched fabric
C.arbitrated loop
D.ring
Answer:B
certification Network Appliance certification NS0-501 NS0-501
NO.6 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A.EMutil
B.SANutil
C.fcp config
D.SANsurfer
E.HBAnywhere
Answer:E
Network Appliance NS0-501 NS0-501 NS0-501
NO.7 For which four operations would you use igroup throttles on a NetApp storage solution? (Choose four.)
A.to assign a specific percentage of the queue resources on each physical port to the igroup
B.to manage pathing to the LUNs
C.to reserve a minimum percentage of queue resources for a specific igroup
D.to limit the number of concurrent I/O requests an initiator can send to the storage system
E.to restrict an igroup to a maximum percentage of use
F.to manage space reclamation
Answer:ACDE
Network Appliance certification NS0-501 NS0-501 examen NS0-501 NS0-501
NO.8 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A.SnapMover and Fibre Channel at the disaster recovery site for all hosts
B.SnapMirror and iSCSI at the disaster recovery site for all hosts
C.Fibre Channel at both locations using ftp to replicate storage
D.MetroCluster and NAS
Answer:B
certification Network Appliance NS0-501 examen NS0-501 NS0-501
NO.9 Click the Exhibit button.
A Solaris 10 host with VERITAS Storage Foundation 4.1 is FCP attached to a FAS3140 high availability
storage system running single image cfmode.
Using the diagram shown, which ports will be considered active by VERITAS DMP using the NetApp ASL
to a LUN on controller 1 mapped to host 1?
A.Port 0b on controller 1 only
B.Port 0d on controller 1 only
C.Port 0b and 0d on controller 1 only
D.Ports 0b and 0d on both controller 1 and controller 2
Answer:C
Network Appliance NS0-501 NS0-501 examen certification NS0-501
NO.10 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A.EMutil
B.SANutil
C.cfgadmin
D.SANsurfer
E.HBAnywhere
Answer:D
Network Appliance NS0-501 NS0-501 certification NS0-501
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Network Appliance NS0-501. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
没有评论:
发表评论