IBM C2010-005 examen pratique questions et réponses

Le test IBM C2010-005 est l'un très improtant dans tous les tests de Certification IBM, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test IBM C2010-005.

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification IBM C2010-005. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test IBM C2010-005. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Le programme de formation IBM C2010-005 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test IBM C2010-005. Votre argent sera tout rendu si vous échouez le test.

Vous avez aussi la possibilité à réussir le test IBM C2010-005. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

Avec la version plus nouvelle de Q&A IBM C2010-005, réussir le test IBM C2010-005 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Code d'Examen: C2010-005
Nom d'Examen: IBM (IBM Maximo Asset Management V7.1 Solution Designer)
Questions et réponses: 100 Q&As

C2010-005 Démo gratuit à télécharger: http://www.pass4test.fr/C2010-005.html

NO.1 Onet or more solutions for each functional gap now have been identified where the
solution requires
one to vary from using standard IBM Maximo Asset Management V7.1.Which two factors are
used to
calculate the impact of each soulution for the project success?(Choose two)
A. length
B. urgency
C. Priority
D. Risk to business
E. difficulty to implement
Answer: DE

IBM   certification C2010-005   C2010-005   C2010-005

NO.2 A customer wants to produce bar code labels for Assets containing specification
data,Which type of
requirement will this be considered as?
A. configuration
B. custom report
C. customization
D. class file extension
Answer: B

IBM   certification C2010-005   certification C2010-005   C2010-005 examen   C2010-005

NO.3 which three data elements are commonly interfaced to IBM maximo asset managment
V7.1 from an
exaternal purchasing system? (choose three)
A. calendars
B. vendor names
C. organzationgs
D. order quantities
E. person information
F. receipt quantities
Answer: BDF

IBM   C2010-005   C2010-005   certification C2010-005

NO.4 The client has outlined in the discovery phase of the project that they want to
incorporate three
divisions,and each has a diferent chart of accounts with the same GL account
configuration.From this
information,how many organizations should be created for the solution is required to be
decided. How
many organizations should be created?
A. one
B. two
C. four
D. three
Answer: D

IBM   C2010-005   C2010-005 examen   C2010-005 examen

NO.5 At a high leve1,around which three data levels are IBM Maximo Asset Management
V7.1 functionality
and security built?(Choose three)
A. site
B. system
C. assets
D. Locations
E. Work Order
F. Organization
Answer: ABF

IBM   C2010-005   certification C2010-005   C2010-005

NO.6 The client requirements outline the need for advanced Asset lifecycle features to
estimate compatible
units or replacement assets,This requirement and other crew management related
requirements are
determined to exceed standard IBM Maximo Asset Management capabilities.Which industry
solution or
add-on provide this and other features?
A. Maximo Linear Assets
B. Maximo for Utilities
C. Maximo for Life Sciences
D. Maximo service Management
Answer: B

IBM   certification C2010-005   certification C2010-005   C2010-005

NO.7 A client needs any work order that is created to be categorized by using specific
codes:DF=defact(reactive),DB=breakdown(reactive),RT=routine(planned),SF=safety(planned
).and
CAPEX=capital expenditure (capital).This is to allow the to report the difference between
proactive,recative,and capital works.Which organization option will be use to fefine these
codes?
A. work type
B. categories
C. work options
D. classifications
Answer: A

IBM   C2010-005 examen   C2010-005 examen   certification C2010-005   C2010-005 examen   C2010-005

NO.8 At which date level do contracts,Labor,and chart of Accounts reside?
A. set
B. site
C. system
D. organization
Answer: D

IBM   C2010-005 examen   C2010-005   C2010-005

NO.9 As part of the solution,multiple organizations and sites have to be created and roating
assets will be
moved between sites tha blong to differnet organizations.What must be done to meet this
requirement?
A. create a common location.
B. create a global rotating suspense account
C. create an item set and assign it to all organizations.
D. create a company set and assign it to all organizations.
Answer: C

IBM   C2010-005 examen   certification C2010-005

NO.10 Which data is commonly imported into the IBM maximo asset management V7.1
through an interface
when integrated with an exatermal purchasing system ?
A. assets
B. work orders
C. vendor data
D. meter readings
Answer: C

IBM   C2010-005   C2010-005   C2010-005

NO.11 The client requirements outline the need for advanced tracking of process
measurements such as
temperature,pressure,and flow. These measurement and test equipment requirments are
determined to
exceed standard IBM Maximo Asset Management capabilities.Which industry solution or
add-on will
provide this and other features?
A. Maximo Calibration
B. Maximo for service Providers
C. Maximo linear assest
D. Maximo lnstruments and controls
Answer: A

IBM   C2010-005   C2010-005 examen   C2010-005   certification C2010-005

NO.12 At which data level do asset,locations,and purchase orders reside?
A. set
B. site
C. system
D. organization
Answer: B

IBM   certification C2010-005   C2010-005

NO.13 The customer's legacy system has no functionality to create custom integrations.
Which two options
are available to migrate data from a legacy system to an IBM Maximo asset management
V7.1(MAM)
environment?(Choose two)
A. Export data from the legacy system and import data as a database dump.
B. Directly insert extracted data from the legacy system into the MAM database.by using SQL
statements.
C. Extract data from the legacy system into flat files and use the Maximo Migration Manager
to migrate
the data into MAM.
D. use the data migratiion option in the maximo lntegration Adapter.after having extracted
data from the
legacy sysem into the comma-separated value(CSV)files.
E. Use the data import option in the lntegration Framework.after having extracted f
Answer: BE

IBM examen   C2010-005   C2010-005   C2010-005 examen   certification C2010-005   certification C2010-005

NO.14 which data type will be used in IBM maximo asset management V7.1 to accepet data
from an external
system which contains upper and lower case alphanumeric characters?
A. ALN
B. BLOB
C. TEXT
D. UPPER
Answer: A

certification IBM   C2010-005   C2010-005 examen   C2010-005 examen   C2010-005 examen

NO.15 Which statement defines a maximo asset in IBM Maximo Asset Management
V7.1(MAM)
A. A Maximo Asset is a record in MAM used to identify equipment.
B. A Maximo Asset is a record in MAM used to identify company assets.
C. A Maximo Asset is any entity described in MAM to capture events and costs
D. A Maximo Asset is any physical entity described in MAM to capture events and costs
Answer: B

certification IBM   C2010-005 examen   certification C2010-005

NO.16 which external system can be interfaced to IBM Maximo Asset Managment V7.1 to
improt meter
readings?
A. Hubometer
B. Fixed Assets
C. General Ledger
D. Control System
Answer: D

IBM   C2010-005 examen   C2010-005

NO.17 What is the life cycle for a Migration Manager Package?
A. define,Create,Distribute,and Deploy.
B. create,Define,Distribute,and Deploy.
C. Create,Approve,Activate,and Distribute
D. Design,Approve,Populate,and Distribute.
Answer: A

IBM   C2010-005   C2010-005   C2010-005 examen   C2010-005

NO.18 As part of setting up IBM maximo asset management V7.1,organization(s) and site(s)
are required to
be created and an organization has to ben actived. What are the required steps to activate an
organization?
A. Create a GL account,update organizations transfer asset account,and activate the
orgainzaiton.
B. Define the GL account codes,update organizations transfer asset account,and activate the
orgainzaiton.
C. Define the asset account codes,update organizations transfer asset account,and activate
the
orgainzaiton.
D. Create the asset account,update organizations transfer asset account,and activate the
orgainzaiton.
Answer: B

certification IBM   certification C2010-005   C2010-005 examen   C2010-005   C2010-005

NO.19 if a customer has a requirements list,when is the best time to review this list with the
customer and
classify the requirements?
A. at the end of the design phase
B. as the first task of Design phase
C. during the process design workshops
D. at the beginning of the configuration phase
Answer: B

certification IBM   C2010-005   C2010-005   C2010-005   C2010-005

NO.20 Which two methods are available to migrate data from a legacy system to IBM
maximo Asset
management V7.1(MaM)(choose two)?
A. use a data mapping tool to link the legacy database to the MAM data warehouse and
update the MAM
data.
B. Extract data from the legacy system and create SQL.statements to insert the data directly
into the MAM
database.
C. connect the legacy database to the MAM database and synchronize the required data by
using an
external data mapping tool.
D. Extract data from the legacy system to comma-separated value files and use the data
import option of
the lntegration framework
E. restore the legacy database on the MAM database server,connect MAM to the legacy
database.and
reorganize the tables.view.and fields.
Answer: BD

certification IBM   C2010-005 examen   C2010-005

La Q&A IBM C2010-005 de Pass4Test est liée bien avec le test réel de IBM C2010-005. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test IBM C2010-005 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.