Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
Le test Certificat Microsoft 070-536-Csharp est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Microsoft 070-536-Csharp. Vous allez prendre toutes essences du test Microsoft 070-536-Csharp dans une courte terme.
Passer le test Microsoft 070-536-Csharp, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification Microsoft 070-536-Csharp. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification Microsoft 070-536-Csharp.
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
Il demande les connaissances professionnelles pour passer le test Microsoft 070-536-Csharp. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Microsoft 070-536-Csharp, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Code d'Examen: 070-536-Csharp
Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
Questions et réponses: 160 Q&As
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Microsoft 070-536-Csharp à la première fois.
070-536-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-536-Csharp.html
NO.1 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. public class Age {
public int Value;
public object CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(obj);
}
throw new ArgumentException("object not an Age");
}
}
B. public class Age {
public int Value;
public object CompareTo(int iValue) {
try {
return Value.CompareTo(iValue);
} catch {
throw new ArgumentException ("object not an Age");
}
}
}
C. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(_age.Value);
}
throw new ArgumentException("object not an Age");
}
}
D. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
try {
return Value.CompareTo(((Age) obj).Value);
} catch {
return -1;
}
}
}
Answer: C
certification Microsoft 070-536-Csharp certification 070-536-Csharp 070-536-Csharp examen certification 070-536-Csharp
NO.2 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ThreadStart(PerformCalculation));
newThread.Start(myValues);
}
B. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
ThreadStart delStart = new
ThreadStart(PerformCalculation);
Thread newThread = new Thread(delStart);
if (newThread.IsAlive) {
newThread.Start(myValues);
}
}
C. private void PerformCalculation (CalculationValues values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Application.DoEvents();
PerformCalculation(myValues);
Application.DoEvents();
}
D. private void PerformCalculation(object values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ParameterizedThreadStart(PerformCalculation));
newThread.Start(myValues);
}
Answer: D
certification Microsoft 070-536-Csharp examen 070-536-Csharp 070-536-Csharp
NO.3 You need to write a code segment that will add a string named strConn to the connection string section
of the application configuration file.
Which code segment should you use?
A. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
myConfig.Save();
B. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
C. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
D. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.Save();
Answer: A
Microsoft certification 070-536-Csharp 070-536-Csharp examen 070-536-Csharp examen 070-536-Csharp
NO.4 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. AppDomainSetup mySetup =
AppDomain.CurrentDomain.SetupInformation;
mySetup.ShadowCopyFiles = "true";
B. System.Diagnostics.Process myProcess;
myProcess = new System.Diagnostics.Process();
C. AppDomain domain;
domain = AppDomain.CreateDomain("MyDomain");
D. System.ComponentModel.Component myComponent;
myComponent = new System.ComponentModel.Component();
Answer: C
Microsoft 070-536-Csharp 070-536-Csharp examen certification 070-536-Csharp
NO.5 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C
Microsoft certification 070-536-Csharp 070-536-Csharp
NO.6 You are instantiating a variable to store only strings. The variable is named messageStore.
You need to ensure that string messages are read and processed in the order in which they are received.
Which code segment should you use?
A. Stack<string> messageStore = new Stack<string>();
messageStore.Push("This is a test message...");
B. Stack messageStore = new Stack();
messageStore.Push("This is a test message...");
C. Queue messageStore = new Queue();
messageStore.Enqueue("This is a test message...");
D. Queue<string> messageStore = new Queue<string>();
messageStore.Enqueue("This is a test message...");
Answer: D
Microsoft 070-536-Csharp examen 070-536-Csharp certification 070-536-Csharp 070-536-Csharp examen
NO.7 You need to write a code segment that will assign the name of the configuration file that the current
application domain uses to a string variable named configFile.
Which two code segments should you use to achieve the goal? (Each correct answer presents a
complete solution. Choose two.)
A. AppDomain domain = AppDomain.CurrentDomain;
configFile =
domain.GetData("APP_CONFIG_FILE").ToString();
B. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = domain.SetupInformation;
configFile = setup.ConfigurationFile;
C. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = new AppDomainSetup();
configFile = setup.ConfigurationFile;
D. AppDomainSetup setup = new AppDomainSetup();
AppDomain domain = AppDomain.CreateDomain("current",
null, setup);
configFile = setup.ConfigurationFile;
Answer: AB
Microsoft 070-536-Csharp 070-536-Csharp examen 070-536-Csharp examen 070-536-Csharp
NO.8 You write the following code.
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs {
private string coverPageInfo;
public FaxArgs(string coverInfo) {
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
D. public class FaxArgs : EventArgs {
private string coverPageInfo;
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
Answer: A
Microsoft 070-536-Csharp 070-536-Csharp examen
NO.9 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
è Initialize each answer to true.
è Minimize the amount of memory used by each survey.
Which storage option should you choose?
A. BitVector32 answers = new BitVector32(1);
B. BitVector32 answers = new BitVector32(-1);
C. BitArray answers = new BitArray (1);
D. BitArray answers = new BitArray(-1);
Answer: B
certification Microsoft 070-536-Csharp examen 070-536-Csharp examen certification 070-536-Csharp
NO.10 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. ArrayList al = new ArrayList();
lock (al.SyncRoot)
{
return al;
}
B. ArrayList al = new ArrayList();
lock (al.SyncRoot.GetType())
{
return al;
}
C. ArrayList al = new ArrayList();
Monitor.Enter(al);
Monitor.Exit(al);
return al;
D. ArrayList al = new ArrayList();
ArrayList sync_al = ArrayList.Synchronized(al);
return sync_al;
Answer: D
certification Microsoft 070-536-Csharp examen certification 070-536-Csharp 070-536-Csharp certification 070-536-Csharp 070-536-Csharp examen
NO.11 You are developing a routine that will periodically perform a calculation based on regularly changing
values from legacy systems. You write the following lines of code. (Line numbers are included for
reference only.)
01 bool exitLoop = false;
02 do {
03
04 exitLoop = PerformCalculation();
05 } while (!exitLoop);
You need to write a code segment to ensure that the calculation is performed at 30-second intervals. You
must ensure that minimum processor resources are used between the calculations.
Which code segment should you insert at line 03?
A. Thread.Sleep(30000);
B. Thread.SpinWait(30000);
C. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.BelowNormal;
D. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.Lowest;
E. Thread.SpinWait(30);
Answer: A
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp examen
NO.12 You are developing an application that stores data about your company's sales and technical support
teams.
You need to ensure that the name and contact information for each person is available as a single
collection when a user queries details about a specific team. You also need to ensure that the data
collection guarantees type safety.
Which code segment should you use?
A. Hashtable team = new Hashtable();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
B. ArrayList team = new ArrayList();
team.Add("1, Hance");
team.Add("2, Jim");
team.Add("3, Hanif");
team.Add("4, Kerim");
team.Add("5, Alex");
team.Add("6, Mark");
team.Add("7, Roger");
team.Add("8, Tommy");
C. Dictionary<int, string> team =
new Dictionary<int, string>();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
D. string[] team =
new string[] {"1, Hance",
"2, Jim", "3, Hanif",
"4, Kerim", "5, Alex",
"6, Mark", "7, Roger",
"8, Tommy"};
Answer: C
certification Microsoft 070-536-Csharp examen 070-536-Csharp examen
NO.13 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t =
new Dictionary<string, string>();
MyDictionary dictionary = (MyDictionary)t;
Answer: A
certification Microsoft 070-536-Csharp examen certification 070-536-Csharp
NO.14 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. public delegate int PowerDeviceOn(bool result,
DateTime autoPowerOff);
B. public delegate bool PowerDeviceOn(object sender,
EventArgs autoPowerOff);
C. public delegate void PowerDeviceOn(DateTime autoPowerOff);
D. public delegate bool PowerDeviceOn(DateTime autoPowerOff);
Answer: C
Microsoft certification 070-536-Csharp 070-536-Csharp 070-536-Csharp examen
NO.15 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
public class Department {
public string name;
public string manager;
}
Each application uses a custom configuration section to store department-specific values in the
application configuration file as shown in the following code.
<Department>
<name>Hardware</name>
<manager>Amy</manager>
</Department>
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. public class deptElement : ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = ConfigurationManager.AppSettings["name"];
dept.manager =
ConfigurationManager.AppSettings["manager"];
return dept;
}
}
B. public class deptElement: ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = reader.GetAttribute("name");
dept.manager = reader.GetAttribute("manager");
}
}
C. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.SelectSingleNode("name").InnerText;
dept.manager =
section.SelectSingleNode("manager").InnerText;
return dept;
}
}
D. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.Attributes["name"].Value;
dept.manager = section.Attributes["manager"].Value;
return dept;
}
}
Answer: C
Microsoft examen 070-536-Csharp examen 070-536-Csharp examen 070-536-Csharp
NO.16 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
<ProjectSection name="Project1">
<role name="administrator" />
<role name="manager" />
<role name="support" />
</ProjectSection>
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. public class Role : ConfigurationElement {
internal string _ElementName = "name";
[ConfigurationProperty("role")]
public string Name {
get {
return ((string)base["role"]);
}
}
}
B. public class Role : ConfigurationElement {
internal string _ElementName = "role";
[ConfigurationProperty("name", RequiredValue = true)]
public string Name {
get {
return ((string)base["name"]);
}
}
}
C. public class Role : ConfigurationElement {
internal string _ElementName = "role";
private string _name;
[ConfigurationProperty("name")]
public string Name {
get {
return _name;
}
}
}
D. public class Role : ConfigurationElement {
internal string _ElementName = "name";
private string _name;
[ConfigurationProperty("role", RequiredValue = true)]
public string Name {
get {
return _name;
}
}
}
Answer: B
certification Microsoft 070-536-Csharp examen 070-536-Csharp 070-536-Csharp examen
NO.17 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.LoadFrom(myPath);
B. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.Load(myPath);
C. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.DynamicDirectory,
"Assembly1.dll");
Assembly asm = AppDomain.CurrentDomain.Load(myPath);
D. AppDomain domain = AppDomain.CurrentDomain;
Assembly asm = domain.GetData("Assembly1.dll");
Answer: A
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp certification 070-536-Csharp
NO.18 You are creating a class named Temperature. The Temperature class contains a public field named F.
The public field F represents a temperature in degrees Fahrenheit.
You need to ensure that users can specify whether a string representation of a Temperature instance
displays the Fahrenheit value or the equivalent Celsius value.
Which code segment should you use?
A. public class Temperature : IFormattable {
public int F;
public string ToString(string format, IFormatProvider fp) {
if ((format == "F")|| (format == null)) return F.ToString();
if (format == "C") return ((F - 32) / 1.8).ToString();
throw new FormatException("Invalid format string");
}
}
B. public class Temperature : ICustomFormatter {
public int F;
public string Format(string format, object arg,
IFormatProvider fp) {
if (format == "C") return ((F - 32) / 1.8).ToString();
if (format == "F") return arg.ToString();
throw new FormatException("Invalid format string");
}
}
C. public class Temperature {
public int F;
public string ToString(string format, IFormatProvider fp) {
if (format == "C") {
return ((F - 32) / 1.8).ToString();
} else {
return this.ToString();
}
}
}
D. public class Temperature {
public int F;
protected string format;
public override String ToString() {
if (format == "C")
return ((F - 32) / 1.8).ToString();
return F.ToString();
}
}
Answer: A
Microsoft certification 070-536-Csharp 070-536-Csharp examen
NO.19 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
01 public void StartService(string serverName){
02 ServiceController crtl = new
03 ServiceController("FileService");
04 if (crtl.Status == ServiceControllerStatus.Stopped){
05 }
06 }
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName;
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName;
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName;
D. Insert the following line of code between lines 04 and 05:
crtl.Continue();
E. Insert the following line of code between lines 04 and 05:
crtl.Start();
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0);
Answer: BE
Microsoft 070-536-Csharp examen 070-536-Csharp examen 070-536-Csharp
NO.20 You create a class that is derived from the Installer class. The class you create is used to perform a
component installation.
The component installation overwrites the value of a registry key. You create a method named
GetRegValue that returns the current value of the registry key.
You need to add a code segment that preserves the original value of the registry key if the component is
uninstalled.
Which code segment should you use?
A. private void BeforeUninstallEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
B. private void CommittedEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
C. public override void Uninstall(
IDictionary savedState) {
base.Uninstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
D. protected override void OnBeforeInstall(
IDictionary savedState) {
base.OnBeforeInstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
Answer: D
certification Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp examen 070-536-Csharp certification 070-536-Csharp
Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Microsoft 070-536-Csharp soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Microsoft 070-536-Csharp est le rêve pour les professionnels ambitieux.
没有评论:
发表评论