Est-ce que vous vous souciez encore de réussir le test HP HP0-081? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification HP HP0-081. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Code d'Examen: HP0-081
Nom d'Examen: HP (OpenVMS System Administration )
Questions et réponses: 146 Q&As
Si vous voulez ne se soucier plus à passer le test HP HP0-081, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test HP HP0-081. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A HP HP0-081 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat HP HP0-081. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test HP HP0-081. Choisir le produit de Pass4Test particulier pour le test Certification HP HP0-081 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de HP HP0-081 très tôt. Pass4Test peut vous permettre à réussir 100% le test HP HP0-081, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
HP0-081 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-081.html
NO.1 What is the lexical function used to return accounting, status, and identification information for
a process?
A.F$USER
B.F$GETJPI
C.F$GETJOB
D.F$PROCESS
Correct:B
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.2 Which statements about the swapfile are true? Select TWO.
A.The swapfile will be used by the modified page writer when the pagefile is full.
B.When a process is swapped out of memory, it is written to the swapfile.
C.The swapfile must exist on the boot device, and be at least the size of WSMAX.
D.The swapfile is optional, and may be installed on a disk other than the boot device.
E.The Swapper process writes pages from the modified page list to the swapfile.
Correct:B D
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.3 Which command deletes a logical name TROLL from the GROUP logical name table?
A.DELETE/LOGICAL TROLL
B.DEASSIGN/GROUP TROLL
C.DELETE/TABLE=GROUP TROLL
D.DEASSIGN/TABLE=GROUP TROLL
Correct:B
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.4 Which statements are true regarding the default behavior of batch job log files? Select TWO.
A.created in the job owners' SYS$LOGIN directory
B.printed on queue SYS$PRINT and retained
C.printed on queue SYS$PRINT and deleted
D.given the same protection as the batch queue
E.created in the same directory as the command procedure
F.given the same protection as the batch procedure
Correct:A C
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.5 Which command displays the LURT (License Unit Requirement Table) entry for an OpenVMS
node? There is more than one correct answer. Select ONE.
A.SHOW LICENSE /LURT
B.LICENSE LIST /TABLE
C.SHOW LICENSE /CHARGE_TABLE
D.LICENSE LIST /MINIMUM_UNITS
E.SHOW CPU /UNIT_REQUIREMENT
F.SHOW LICENSE /UNIT_REQUIREMENT
Correct:A B C D E F
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.6 To review all the audit events for a specific user, which command is used?
A.ANALYZE/AUDIT/FULL/SINCE=TODAY/USER=ADAMS
SYS$MANAGER:SECURITY.AUDIT$JOURNAL
B.ANALYZE/AUDIT/FULL/ACCOUNT=PAYROLL SYS$MANAGER:SECURITY.AUDIT$JOURNAL
C.ANALYZE/AUDIT/FULL/SELECT=PROCESS=NAME=ADAMS
SYS$MANAGER:SECURITY.AUDIT$JOURNAL
D.ANALYZE/AUDIT/FULL/SELECT=USERNAME=ADAMS
SYS$MANAGER:SECURITY.AUDIT$JOURNAL
Correct:D
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.7 VMScluster interconnects serve which purposes? Select TWO.
A.host systems accessing all physical devices and mailboxes
B.host systems accessing storage devices through the MSCP server
C.communication to the master node maintaining the Dedicated CPU Lock Manager
D.direct access to the master node's memory for the shared lock database
E.host systems in the cluster communicating with each other
Correct:B E
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.8 To what does the term "working set" refer?
A.processes that are currently residing in the system's balance set
B.virtual pages that are mapped by a process that is in the CUR state
C.virtual pages that are currently valid in the global page table
D.virtual pages that a process can access without generating a page fault
Correct:D
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.9 After execution of the command: $ DEFINE/JOB LOGNAME SYS$LOGIN:MYFILE.DAT What
happens to the logical name LOGNAME?
A.It is visible to all processes in the same UIC group.
B.It is deassigned automatically on the next image exit.
C.It is placed into the process logical name table.
D.It is visible to all processes in this process tree.
Correct:D
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.10 Based on the message format, "%facility-s-identification, text", where "s" represents the
severity; what would a severity level of "E" represent?
A.The command may have performed some, but not all, of your request.
B.The output or program result is incorrect, but the system may attempt to continue execution.
C.The output or program result is incorrect. The system cannot continue to execute the request.
D.The system has performed your request. The message provides information about the process.
Correct:B
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.11 Which command correctly terminates the AUDIT_SERVER process?
A.STOP AUDIT_SERVER
B.SET AUDIT /SERVER=FINAL_ACTION=CRASH
C.SET AUDIT /SERVER=EXIT
D.SHUTDOWN AUDIT_SERVER
Correct:C
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.12 What is the command to specify that DECwindows client programs use node XARA as the
DECwindows server, running over DECnet protocol?
A.DEFINE DECW$DISPLAY XARA::
B.SET DISPLAY/CREATE/NODE=XARA
C.CREATE/DISPLAY/NODE=XARA/PROTOCOL=DECNET
D.SET DECWINDOWS/NODE=XARA/TRANSPORT=DECNET
Correct:B
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.13 Assuming patch kit DEC-AXPVMS-VMS732_SYS-V0600--4.PCSI is the latest patch installed,
which statements are true? Select TWO.
A.PRODUCT ERASE * will remove all existing patches
B.PRODUCT UNDO will remove the patch if it was installed with the /SAVE_RECOVERY_DATA option.
C.@SYS$UPDATE:VMSINSTAL REMOVE will remove the patch if it was installed with the
/SAVE_RECOVERY_DATA option.
D.PRODUCT DELETE RECOVERY_DATA /ALL will erase any existing undo data.
E.PRODUCT REMOVE_UPDATE will remove the patch if it was installed with the
/SAVE_RECOVERY_DATA option.
Correct:B D
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.14 What are benefits of VMS clustering? Select THREE.
A.non-stop processing
B.massively parallel computing
C.single security domain
D.transparent access to storage between HP-UX, OpenVMS, and Linux systems
E.shared storage across multiple systems
F.cross-node automatic process failover
G.high availability
Correct:C E G
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.15 Click the Exhibit button. Which command clears this intrusion record?
A.DELETE /INTRUDER/RECORD=XARA/0003440121:SMITH
B.DELETE /INTRUSION_RECORD "XARA/0003440121:SMITH"
C.DELETE /INTRUSION_RECORD /SOURCE="XARA/0003440121:SMITH"
D.SET AUDIT /DELETE /INTRUSION_RECORD "XARA/0003440121:SMITH"
Correct:B
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.16 By default, which file stores the system audit records?
A.SYS$MANAGER:OPERATOR.LOG
B.SYS$MANAGER:AUDIT_SERVER.AUDIT$JOURNAL
C.SYS$MANAGER:ACCOUNTNG.DAT
D.SYS$MANAGER:SECURITY.AUDIT$JOURNAL
Correct:D
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.17 Which installation option performs a new installation on a disk?
A.CURRENT
B.OVERWRITE
C.INITIALIZE
D.PRESERVE
Correct:C
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.18 What is the difference between a buffered I/O (BIO) and a direct I/O (DIO)?
A.The user must provide a buffer to perform a BIO, but not for a DIO.
B.BIOs are substantially faster than DIOs, but consume more memory.
C.BIO data is copied to/from a system buffer before/after performing the I/O.
D.Most I/Os to terminals are DIOs; all I/Os to disks are BIOs.
Correct:C
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.19 What is the purpose of security auditing?
A.prevent hackers from penetrating the system
B.analyze system usage and project future growth trends
C.analyze and record system use to detect attempts to compromise system security
D.gather system user statistics to enable system managers to charge for resource consumption
Correct:C
HP HP0-081 HP0-081 HP0-081 HP0-081
NO.20 Which command or qualifier is used to display each line of a command procedure while it is
executing?
A.SET NOON
B.SET VERIFY
C.@procedure/VERIFY
D.@procedure/OUTPUT=file
Correct:B
HP HP0-081 HP0-081 HP0-081 HP0-081
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test HP HP0-081 à se preuver. Mais le taux du succès et bien bas. Participer le test HP HP0-081 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
没有评论:
发表评论